Snapper FB15250KW, BC25BE, BC25H, GM2515KAW, GM2513H, GM2513BS manual Blade Clutch Adjustment

Page 18

Troubleshooting, Adjustment, & Service

BLADE CLUTCH ADJUSTMENT

WARNING

Shut off engine before attempting this adjustment procedure.

If the mower blade does not stop running when the blade clutch lever is in the DISENGAGED position, does not run at full speed, adjust the Blade Clutch tension.

1.Remove clutch cover plate (A, Figure 19).

2.Loosen nut (D, Figure 17).

3.Remove hairpin clip (E).

4.Slide clutch rod fitting (C) out of blade clutch lever

(B).

5.Move clutch rod lever (B) to fully disengaged position.

6.Push forward on the blade clutch engagement lever (Figure 18).

7.Adjust nut (D) and clutch rod fitting (C) until there is no tension on the spring and minimal slack (approxi- mately 1/16”) when the fitting is placed into hole in the blade clutch lever.

8.Attach clutch rod fitting to the blade clutch lever using washer and hairpin clip. Tighten nut.

9.Start engine. Blade should not rotate.

10. Engage blade. Blade should come up to full speed.

11. .Disengage blade. Blade should stop in 5 seconds or less. Stop engine.

12. Install clutch cover plate.

 

B

A

C

 

D

 

E

Figure 17 - Blade Clutch Adjustment

A.Clutch Rod

B.Clutch Rod Lever

C.Clutch Rod Fitting

D.Locknut

E.Hairpin Clip

17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OPERATOR’S Manual Table of Contents Safe Operation Practices for WALK-BEHIND Mowers General OperationSlope Operation Safety Rules and InformationService ChildrenSafety Rules & Information Safety DecalsDecal Danger Dismemberment Decal WarningDecal Engine Throttle Control Decal Danger Flying ObjectsFeatures & Controls Control FunctionsBefore Starting Engine Starting the EngineEngaging the Transmission To Start EngineOperating the Mower To Propel Unit ForwardTo Propel Unit In Reverse ENGAGING/DISENGAGING the Cutting Blade To Disengage Cutting BladeTo Adjust Cutting Height StorageLubrication Regular MaintenanceService Interval Every 25 Hours Lubricate Rear Axle ShaftsCleaning the Battery and Cables 9HP Models Regular MaintenanceBattery Service Cleaning the Battery and Cables All Models Except 9HPServicing the Mower Blades Removing the BladeTroubleshooting Adjustment, & Service TroubleshootingTroubleshooting, Adjustment & Service TroubleshootingSerial Number Troubleshooting, Adjustment, & ServiceTravel Control Adjustment Serial Number 012003001-UpBlade Clutch Adjustment Shut off engine before attempting this adjustment procedureBlade Brake Adjustment Mower Belt AdjustmentTraction Drive Belt Adjustment For S/N 0For S/N 071601076 up Troubleshooting, Adjustment & Service Mower Belt ReplacementReplacement Parts SpecificationsParts & Accessories Maintenance ItemsPage Products, Inc Macon Street/PO Box McDonough, GA

GM2513BS, GM2515KAW, BC25BE, BC25H, GM2513H specifications

The Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW are a series of robust outdoor power equipment designed to tackle a variety of landscaping tasks. Each model comes with unique features and characteristics that cater to different user needs, ensuring efficient performance and reliability.

The Snapper FB15250KW is a versatile 21-inch push lawn mower equipped with a powerful 150cc engine. It features a 3-in-1 cutting system, allowing users to mulch, bag, or side discharge grass clippings. Its lightweight design and ergonomic handle make it easy to maneuver, while the adjustable cutting height provides flexibility for varying grass conditions. The easy-start engine technology ensures quick and reliable starting in any weather, making it a favorite for homeowners.

The GM2513H model is a gas-powered walk-behind mower that focuses on durability and performance. Its 25-inch cutting deck allows for larger mowing areas, perfect for medium to large lawns. This mower is equipped with self-propelling capabilities, which significantly reduces user effort during operation. The mower’s high rear wheels provide stability and traction on rough terrain, enhancing overall mowing efficiency.

For those looking for a string trimmer, the BC25H and BC25BE models offer exceptional performance. The BC25H features a powerful two-cycle engine and a straight shaft design, making it ideal for trimming hard-to-reach areas. Its lightweight build ensures maximum comfort during extended use. The BC25BE, similarly equipped with a robust engine, adds versatility by incorporating a detachable design for easy storage and transportation.

Lastly, the GM2515KAW is a high-performance riding mower tailored for extensive lawns. It boasts a powerful engine and a wide cutting deck, which cuts down mowing time significantly. The comfortable seat and adjustable steering provide an excellent user experience, allowing operators to navigate their lawns with ease. Additionally, the mower is designed with advanced safety features, ensuring user confidence during operation.

In summary, the Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW cater to diverse landscaping needs, providing users with efficiency, ease of use, and reliability. These models embody Snapper's commitment to quality, making them ideal choices for both residential and professional applications in lawn care.
Top Page Image Contents