Snapper FB15250KW, BC25BE, BC25H Regular Maintenance, Lubrication, Service Interval Every 25 Hours

Page 12

Regular

Maintenance

LUBRICATION

Service Interval: Every 25 Hours

Lubricate the unit at the locations shown in Figure 10 as well as the lubrication points listed. Generally, all moving parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Wipe surfaces clean before and after lubrication.

Grease:

• blade arbor

Note - This grease point is located under the blade deck, on the arbor.

Oil:

• traction drive control linkage

• blade engagement lever

• axle shafts

Figure 10 - Lubrication Points

Lubricate Rear Axle Shafts

Service Interval: Yearly

We recommend removing the rear wheel hubs and lubri- cating the axle shafts yearly. This prevents the wheel hubs from seizing onto the axle shaft and makes future service easier.

1.Turn off the ignition, disengage the PTO.

2.Using a jack or chain hoist positioned at the center of the rear frame, carefully lift the unit up until the rear tires are approximately 1" - 2" (2.5-5 cm) off the ground.

Note: For overall unit stability during service, do not jack rear end higher than required for wheel removal.

3.Support the rear of the unit on jack stands positioned under the rear frame.

4.Remove the hardware retaining the wheel assembly to the axle (Figure 11) and lubricate the axle shaft using anti-seize compound or lithium grease.

5.Reinstall the components in reverse order of disas- sembly and lower the unit. Be sure the key (A, Figure 11) is in place in the axle keyway.

A

C

B

Figure 11. Axle Shaft

A.Key

B.Retaining Ring

C.Wheel & Hub

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Table of Contents Safe Operation Practices for WALK-BEHIND Mowers General OperationSafety Rules and Information ServiceSlope Operation ChildrenSafety Rules & Information Safety DecalsDecal Warning Decal Engine Throttle ControlDecal Danger Dismemberment Decal Danger Flying ObjectsFeatures & Controls Control FunctionsStarting the Engine Engaging the TransmissionBefore Starting Engine To Start EngineOperating the Mower To Propel Unit ForwardTo Propel Unit In Reverse ENGAGING/DISENGAGING the Cutting Blade To Disengage Cutting BladeTo Adjust Cutting Height StorageRegular Maintenance Service Interval Every 25 HoursLubrication Lubricate Rear Axle ShaftsRegular Maintenance Battery ServiceCleaning the Battery and Cables 9HP Models Cleaning the Battery and Cables All Models Except 9HPServicing the Mower Blades Removing the BladeTroubleshooting Adjustment, & Service TroubleshootingTroubleshooting, Adjustment & Service TroubleshootingTroubleshooting, Adjustment, & Service Travel Control AdjustmentSerial Number Serial Number 012003001-UpBlade Clutch Adjustment Shut off engine before attempting this adjustment procedureBlade Brake Adjustment Mower Belt AdjustmentTraction Drive Belt Adjustment For S/N 0For S/N 071601076 up Troubleshooting, Adjustment & Service Mower Belt ReplacementSpecifications Parts & AccessoriesReplacement Parts Maintenance ItemsPage Products, Inc Macon Street/PO Box McDonough, GA

GM2513BS, GM2515KAW, BC25BE, BC25H, GM2513H specifications

The Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW are a series of robust outdoor power equipment designed to tackle a variety of landscaping tasks. Each model comes with unique features and characteristics that cater to different user needs, ensuring efficient performance and reliability.

The Snapper FB15250KW is a versatile 21-inch push lawn mower equipped with a powerful 150cc engine. It features a 3-in-1 cutting system, allowing users to mulch, bag, or side discharge grass clippings. Its lightweight design and ergonomic handle make it easy to maneuver, while the adjustable cutting height provides flexibility for varying grass conditions. The easy-start engine technology ensures quick and reliable starting in any weather, making it a favorite for homeowners.

The GM2513H model is a gas-powered walk-behind mower that focuses on durability and performance. Its 25-inch cutting deck allows for larger mowing areas, perfect for medium to large lawns. This mower is equipped with self-propelling capabilities, which significantly reduces user effort during operation. The mower’s high rear wheels provide stability and traction on rough terrain, enhancing overall mowing efficiency.

For those looking for a string trimmer, the BC25H and BC25BE models offer exceptional performance. The BC25H features a powerful two-cycle engine and a straight shaft design, making it ideal for trimming hard-to-reach areas. Its lightweight build ensures maximum comfort during extended use. The BC25BE, similarly equipped with a robust engine, adds versatility by incorporating a detachable design for easy storage and transportation.

Lastly, the GM2515KAW is a high-performance riding mower tailored for extensive lawns. It boasts a powerful engine and a wide cutting deck, which cuts down mowing time significantly. The comfortable seat and adjustable steering provide an excellent user experience, allowing operators to navigate their lawns with ease. Additionally, the mower is designed with advanced safety features, ensuring user confidence during operation.

In summary, the Snapper FB15250KW, GM2513H, BC25H, BC25BE, and GM2515KAW cater to diverse landscaping needs, providing users with efficiency, ease of use, and reliability. These models embody Snapper's commitment to quality, making them ideal choices for both residential and professional applications in lawn care.
Top Page Image Contents