Snapper CZT19481KWV Cutting Height Adjustment, OPERATION- Motion Controls, Driving Machine

Page 13

Section 3 - OPERATING INSTRUCTIONS

3.3CUTTING HEIGHT ADJUSTMENT

1.Adjust cutting height, as desired, to any position, using deck lift lever. IMPORTANT: There is a foot assist pedal located to the right front side of the footrest. Always use this assist pedal to raise or lower the deck to the desired cutting height. See Figure 3.10.

2.Insert the stop pin to desired cutting height. See Figure 3.11.

NOTE: The engine does not have to be running to adjust cutting height.

DECK LIFT LEVER

SHOWN IN HIGHEST

POSITION

DECK LIFT

ASSIST PEDAL

FIGURE 3.10

6 HOLE POSITIONS FOR STOP PIN

FIGURE 3.11

!

WARNING

!

DO NOT make turns at high speed. Slow machine motion. Move motion control lever gently and with caution. DO NOT make sudden changes in speed or direction.

3.4 OPERATION- MOTION CONTROLS

This machine is equipped with dual hydrostatic wheel drive transmissions. Each hydro pump is controlled by a sepa- rate motion control lever. The left lever controls the left wheel drive hydro pump and the right lever controls the right wheel drive hydro pump. These levers control the direction of motion, Forward & Reverse, and the speed of motion. Move both levers forward to propel the machine forward. Move both levers rearward to propel the machine in reverse. The speed of motion is continuously variable from neutral (zero) to the maximum. Moving the levers far- ther from the neutral position will cause the speed of motion to increase. To turn, move the lever on the side to which you want to turn slightly rearward of the other lever. Move levers slowly and carefully. DO NOT make sudden changes in speed or direction. Always slow machine motion before turning. To stop the motion of the machine, bring both motion control levers to the neutral position. Engage parking brake.

3.4.1. DRIVING MACHINE

1.Fasten seat belt and adjust to a snug fit.

2.Start engine. Release parking brake.

3.Drop motion control levers down from neutral lock positions. See Figure 3.12.

4.Move motion control levers gently and with caution in desired direction. See Figure 3.12.

FORWARD - Move both control levers forward. REVERSE - Move both control levers rearward. LEFT TURN - Move left control rearward or move right control lever forward.

RIGHT TURN - Move left control forward or move right control lever rearward.

ZERO RADIUS TURN - Move one control lever for- ward and move the other control lever rearward simul- taneously.

REARWARD

MOVEMENT

FORWARD

MOVEMENT

FIGURE 3.12

!

WARNING

!

Zero-turning the machine at any speed can result in operator disorientation, or in operator being thrown from the machine. Exercise extreme cau- tion when executing a zero-turn.

13

Image 13
Contents Commercial MID-MOUNT Zero Turning Hydro Drive Series From Previous Column Important Safety InstructionsSafe Handling of Gasoline From Previous TowingTable of Contents Introduction FamiliarizationNomenclature Safety Messages and Symbols Safety Messages and Symbols Roll BAR Protective Structure Decals PRE-START Check List Operating InstructionsOperating Instructions Starting Mower Blades Stopping EngineStopping Mower Blades Parking BrakeOPERATION- Motion Controls Cutting Height AdjustmentDriving Machine Stopping Machine Safety Interlock System ChecksFolding the Roll BAR Protective Structure Engine Must not Start ifService After First 5 Hours Maintenanceoperating InstructionsCheck Mower Blade After Every 25 Operating Hours 4.3.1. Engine Check Mower Drive Belt 1. Lower deck to lowest settingMower Components 1. Mower Drive Belt Deck shown with discharge raisedBefore Operating Machine Riding Mower Lubrication 1. Front Wheel BearingsAnnually END of Each Season EngineDeck Removal Maintenanceoperating Instructions Neutral Position Adjustments ADJUSTMENTSOPERAINGINSTRUCTIONS& RepairMower Deck & Component Adjustments Neutral Position Adjustments From PreviousMower Deck Adjustment Levelness Side to Side and Front to RearParking Brake Adjustment Tracking Adjustment Traction Belt ReplacementTraction Belt Tension Belt Adjustment Belt ReplacementMower Drive Belt Replacement and Adjustment Belt RemovalBlade Sharpening Battery Installation 10BATTERY Battery RemovalBattery Charging State of Charge Digital Voltmeter Battery Testing11HYDRAULIC SYSTEM, Purging Problem Probable Cause Corrective Action SectionTROUBLESHOOTING3 Operating InstructionsCutting Grass Service REF. Number Each SERVICEection3 SCHEDULE- OP Rating Instructions100 Performed USE HRS SeasonDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Commercial MID-MOUNT Zero Turning Hydro Drive Series
Related manuals
Manual 40 pages 5.07 Kb

CZT19481KWV specifications

The Snapper CZT19481KWV is a powerful and versatile lawn mower that combines strength and efficiency to deliver exceptional performance for both residential and commercial landscaping needs. Designed with attention to detail and advanced technology, this mower stands out in its category, making lawn care both easier and more enjoyable.

At the heart of the Snapper CZT19481KWV is its robust 19.5 HP Briggs & Stratton engine, known for its reliability and impressive power output. This engine ensures smooth and consistent cutting performance on a variety of terrains, from flat lawns to hilly landscapes. Additionally, its Easy Start feature allows users to fire up the mower with minimal effort, transforming what could be a cumbersome task into a quick and straightforward experience.

One of the standout features of the CZT19481KWV is its zero-turn technology, which provides unparalleled maneuverability. This design allows the operator to make sharp turns and navigate around obstacles with ease, significantly reducing mowing time. With a cutting width of 48 inches, this mower efficiently tackles large areas while maintaining precision.

The mower comes equipped with a heavy-duty steel deck that ensures durability and long-lasting performance. Its robust construction minimizes the chances of wear and tear, even when faced with tough mowing conditions. The deck also features a 3-in-1 cutting system, allowing users to choose between bagging, mulching, or side discharging grass clippings, providing flexibility based on lawn care preferences.

User comfort is a priority with the Snapper CZT19481KWV. It features an adjustable high-back seat, which provides excellent support and reduces fatigue during long mowing sessions. The ergonomically designed controls are easy to reach and operate, ensuring that users can maintain focus on the task at hand without distraction.

In terms of maintenance, the Snapper CZT19481KWV is designed for simplicity. Features like an easy-access oil drain and large fuel tank reduce the hassle often associated with lawn mower upkeep. Its compact design makes it easy to store, while the stylish aesthetics give it a modern touch that will appeal to a wide range of users.

With its combination of impressive features, durable construction, and user-friendly design, the Snapper CZT19481KWV is an excellent choice for those looking to elevate their lawn care experience, delivering results that are both professional and aesthetically pleasing. Whether maintaining a sprawling landscape or a simple backyard, this mower is equipped to handle it all with efficiency and ease.