Snapper CZT19481KWV 10BATTERY Battery Removal, Battery Installation, Battery Charging

Page 26

Section 53 - ADJUSTMENTSOPERAINGINSTRUCTIONS& REPAIR

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine running. STOP engine. STOP blades. Set brake. Remove key. Remove spark plug wires and secure away from spark plugs. Engine and components are HOT. Avoid serious burns; allow suf- ficient time for all parts to cool.

5.10BATTERY

5.10.1. BATTERY REMOVAL

1.Remove battery retainer. See Figure 5.17.

2.Slide terminal cover away from positive terminal.

3.Observe and note cable positions on battery. Disconnect cables from battery terminals, disconnect- ing BLACK (Negative) cable first and RED (Positive) last. Retain mounting bolts and nuts. See Figure 5.17.

REMOVE

BATTERY

RETAINER

DATE

FIGURE 5.17

5.10.2. BATTERY INSTALLATION

1.Position battery into battery compartment.

2.Connect cables to battery terminals. Connect RED (Positive) cable first. Connect BLACK (Negative) cable last. See Figure 5.18.

3.Reinstall battery retainer and positive terminal cover. See Figure 5.17.

BLACK (NEGATIVE)

RED (POSITIVE)

CABLE

CABLE

WHEN DISCONNECTING

TERMINAL COVER MUST

CABLES, DISCONNECT

SHIELD POSITIVE TERMINAL

NEGATIVE FIRST

AFTER INSTALLATION

FIGURE 5.18

5.10.3. BATTERY CHARGING

NOTE: The battery in this machine is maintenance- free. It has been filled to the proper level with acid and is sealed. Do not attempt to open battery.

1.Remove battery.

2.Place battery in a well-ventilated area on a level, non-concrete surface.

3.Connect battery charger to battery terminals. RED to positive (+) terminal and BLACK to negative (-) ter- minal.

4.Slow charge battery at 6-10 amps for 1 hour.

5.If battery will not accept charge or is partially charged after 1 hour of charging, replace with new bat- tery.

!

WARNING

!

Keep all sparks, flame and fire away from area when charging battery.

26

Image 26
Contents Commercial MID-MOUNT Zero Turning Hydro Drive Series Important Safety Instructions From Previous ColumnSafe Handling of Gasoline Towing From PreviousTable of Contents Nomenclature FamiliarizationIntroduction Safety Messages and Symbols Safety Messages and Symbols Roll BAR Protective Structure Decals Operating Instructions PRE-START Check ListOperating Instructions Stopping Mower Blades Stopping EngineStarting Mower Blades Parking BrakeDriving Machine Cutting Height AdjustmentOPERATION- Motion Controls Folding the Roll BAR Protective Structure Safety Interlock System ChecksStopping Machine Engine Must not Start ifCheck Mower Blade Maintenanceoperating InstructionsService After First 5 Hours Mower Components 1. Mower Drive Belt Check Mower Drive Belt 1. Lower deck to lowest settingAfter Every 25 Operating Hours 4.3.1. Engine Deck shown with discharge raisedAnnually END of Each Season Riding Mower Lubrication 1. Front Wheel BearingsBefore Operating Machine EngineDeck Removal Maintenanceoperating Instructions ADJUSTMENTSOPERAINGINSTRUCTIONS& Repair Neutral Position AdjustmentsMower Deck Adjustment Levelness Neutral Position Adjustments From PreviousMower Deck & Component Adjustments Side to Side and Front to RearParking Brake Adjustment Traction Belt Tension Traction Belt ReplacementTracking Adjustment Mower Drive Belt Replacement and Adjustment Belt ReplacementBelt Adjustment Belt RemovalBlade Sharpening Battery Charging 10BATTERY Battery RemovalBattery Installation Battery Testing State of Charge Digital Voltmeter11HYDRAULIC SYSTEM, Purging SectionTROUBLESHOOTING3 Operating Instructions Problem Probable Cause Corrective ActionCutting Grass 100 SERVICEection3 SCHEDULE- OP Rating InstructionsService REF. Number Each Performed USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Commercial MID-MOUNT Zero Turning Hydro Drive Series
Related manuals
Manual 40 pages 5.07 Kb

CZT19481KWV specifications

The Snapper CZT19481KWV is a powerful and versatile lawn mower that combines strength and efficiency to deliver exceptional performance for both residential and commercial landscaping needs. Designed with attention to detail and advanced technology, this mower stands out in its category, making lawn care both easier and more enjoyable.

At the heart of the Snapper CZT19481KWV is its robust 19.5 HP Briggs & Stratton engine, known for its reliability and impressive power output. This engine ensures smooth and consistent cutting performance on a variety of terrains, from flat lawns to hilly landscapes. Additionally, its Easy Start feature allows users to fire up the mower with minimal effort, transforming what could be a cumbersome task into a quick and straightforward experience.

One of the standout features of the CZT19481KWV is its zero-turn technology, which provides unparalleled maneuverability. This design allows the operator to make sharp turns and navigate around obstacles with ease, significantly reducing mowing time. With a cutting width of 48 inches, this mower efficiently tackles large areas while maintaining precision.

The mower comes equipped with a heavy-duty steel deck that ensures durability and long-lasting performance. Its robust construction minimizes the chances of wear and tear, even when faced with tough mowing conditions. The deck also features a 3-in-1 cutting system, allowing users to choose between bagging, mulching, or side discharging grass clippings, providing flexibility based on lawn care preferences.

User comfort is a priority with the Snapper CZT19481KWV. It features an adjustable high-back seat, which provides excellent support and reduces fatigue during long mowing sessions. The ergonomically designed controls are easy to reach and operate, ensuring that users can maintain focus on the task at hand without distraction.

In terms of maintenance, the Snapper CZT19481KWV is designed for simplicity. Features like an easy-access oil drain and large fuel tank reduce the hassle often associated with lawn mower upkeep. Its compact design makes it easy to store, while the stylish aesthetics give it a modern touch that will appeal to a wide range of users.

With its combination of impressive features, durable construction, and user-friendly design, the Snapper CZT19481KWV is an excellent choice for those looking to elevate their lawn care experience, delivering results that are both professional and aesthetically pleasing. Whether maintaining a sprawling landscape or a simple backyard, this mower is equipped to handle it all with efficiency and ease.