Snapper CZT19481KWV important safety instructions Maintenanceoperating Instructions

Page 19

Section 43 - MAINTENANCEOPERATING INSTRUCTIONS

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine running. STOP engine. STOP blades. Set brake. Remove key. Remove spark plug wires and secure away from spark plugs. Engine and components are HOT. Avoid serious burns; allow suf- ficient time for all parts to cool.

7.Remove bolts and nuts to disconnect both stabiliz- ers from mower deck and power unit. See Figure 4.12 and 4.13.

4.6DECK REMOVAL (Continued from previous page) 4. Remove inside nuts that secure chain to front lift arm. See Figure 4.10.

FRONT

LIFT ARM

 

CHAIN

REMOVE INSIDE

 

NUT THAT

 

SECURES CHAIN TO

DECK HANGER

FRONT LIFT ARM

BRACKET

FIGURE 4.10

5.Remove inside nuts that secure chain to rear lift arm. See Figure 4.11.

REMOVE INSIDE NUT

THAT SECURES CHAIN

STABILIZER

DECK

STABILIZER

DECK

REMOVE NUTS AND BOLTS

THAT SECURE STABILIZERS

TO MOWER DECK

FIGURE 4.12

REMOVE NUTS AND BOLTS

THAT SECURE STABILIZERS

TO POWER UNIT

TO REAR LIFT ARM

REAR LIFT ARM

CHAIN

FIGURE 4.11

6.Remove mower drive belt from around blade clutch pulley. Refer to Section “MOWER DRIVE BELT REPLACEMENT AND ADJUSTMENT”.

FIGURE 4.13

8.Remove wooden blocks from underneath deck and roll/slide deck from underneath power unit.

9.Reinstall deck in reverse order, in which it was removed. Torque hardware to 20 to 30 ft lbs.

4.7HYDRAULIC FLUID FILTER

IMPORTANT: REFER TO SECTION "HYDRAULIC SYS- TEM PURGING" BEFORE PERFORMING FILTER MAIN- TENANCE.

The first filter change is recommended at 200 hours. After the first change, the recommended interval is every 500 hours. Replace with approved filter only (Snapper P/N 1719168). Install following instructions provided with the filter. Add SAE 20W50 oil to bring the level in the reservoir to 1-½" below top of filler neck. Run machine for several minutes and re-check fluid level. Add oil as needed.

19

Image 19
Contents Commercial MID-MOUNT Zero Turning Hydro Drive Series From Previous Column Important Safety InstructionsSafe Handling of Gasoline From Previous TowingTable of Contents Introduction FamiliarizationNomenclature Safety Messages and Symbols Safety Messages and Symbols Roll BAR Protective Structure Decals PRE-START Check List Operating InstructionsOperating Instructions Parking Brake Stopping EngineStarting Mower Blades Stopping Mower BladesOPERATION- Motion Controls Cutting Height AdjustmentDriving Machine Engine Must not Start if Safety Interlock System ChecksStopping Machine Folding the Roll BAR Protective StructureService After First 5 Hours Maintenanceoperating InstructionsCheck Mower Blade Deck shown with discharge raised Check Mower Drive Belt 1. Lower deck to lowest settingAfter Every 25 Operating Hours 4.3.1. Engine Mower Components 1. Mower Drive BeltEngine Riding Mower Lubrication 1. Front Wheel BearingsBefore Operating Machine Annually END of Each SeasonDeck Removal Maintenanceoperating Instructions Neutral Position Adjustments ADJUSTMENTSOPERAINGINSTRUCTIONS& RepairSide to Side and Front to Rear Neutral Position Adjustments From PreviousMower Deck & Component Adjustments Mower Deck Adjustment LevelnessParking Brake Adjustment Tracking Adjustment Traction Belt ReplacementTraction Belt Tension Belt Removal Belt ReplacementBelt Adjustment Mower Drive Belt Replacement and AdjustmentBlade Sharpening Battery Installation 10BATTERY Battery RemovalBattery Charging State of Charge Digital Voltmeter Battery Testing11HYDRAULIC SYSTEM, Purging Problem Probable Cause Corrective Action SectionTROUBLESHOOTING3 Operating InstructionsCutting Grass Performed USE HRS Season SERVICEection3 SCHEDULE- OP Rating InstructionsService REF. Number Each 100Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Commercial MID-MOUNT Zero Turning Hydro Drive Series
Related manuals
Manual 40 pages 5.07 Kb

CZT19481KWV specifications

The Snapper CZT19481KWV is a powerful and versatile lawn mower that combines strength and efficiency to deliver exceptional performance for both residential and commercial landscaping needs. Designed with attention to detail and advanced technology, this mower stands out in its category, making lawn care both easier and more enjoyable.

At the heart of the Snapper CZT19481KWV is its robust 19.5 HP Briggs & Stratton engine, known for its reliability and impressive power output. This engine ensures smooth and consistent cutting performance on a variety of terrains, from flat lawns to hilly landscapes. Additionally, its Easy Start feature allows users to fire up the mower with minimal effort, transforming what could be a cumbersome task into a quick and straightforward experience.

One of the standout features of the CZT19481KWV is its zero-turn technology, which provides unparalleled maneuverability. This design allows the operator to make sharp turns and navigate around obstacles with ease, significantly reducing mowing time. With a cutting width of 48 inches, this mower efficiently tackles large areas while maintaining precision.

The mower comes equipped with a heavy-duty steel deck that ensures durability and long-lasting performance. Its robust construction minimizes the chances of wear and tear, even when faced with tough mowing conditions. The deck also features a 3-in-1 cutting system, allowing users to choose between bagging, mulching, or side discharging grass clippings, providing flexibility based on lawn care preferences.

User comfort is a priority with the Snapper CZT19481KWV. It features an adjustable high-back seat, which provides excellent support and reduces fatigue during long mowing sessions. The ergonomically designed controls are easy to reach and operate, ensuring that users can maintain focus on the task at hand without distraction.

In terms of maintenance, the Snapper CZT19481KWV is designed for simplicity. Features like an easy-access oil drain and large fuel tank reduce the hassle often associated with lawn mower upkeep. Its compact design makes it easy to store, while the stylish aesthetics give it a modern touch that will appeal to a wide range of users.

With its combination of impressive features, durable construction, and user-friendly design, the Snapper CZT19481KWV is an excellent choice for those looking to elevate their lawn care experience, delivering results that are both professional and aesthetically pleasing. Whether maintaining a sprawling landscape or a simple backyard, this mower is equipped to handle it all with efficiency and ease.