Snapper XL Series, 2400 XL Series, RD Series manual Specifications

Page 37

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

*The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual “on–site” power). This difference is due to a variety of factors including, but not lim- ited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, max- imum governed engine speed, individual engine to engine variability, design of the particular piece of power equip- ment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match

the values derived using the foregoing codes.

ENGINE:

21 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Vanguard

Horsepower

21

@ 3600 rpm

Displacement

28.3 Cu. in (627 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

56

Oz. (1.4 L)

20 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Vanguard

Horsepower

20

@ 3600 rpm

Displacement

34.8 Cu. in (570 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

48

Oz. (1.4 L)

18 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Vanguard

Horsepower

18

@ 3600 rpm

Displacement

34.8 Cu. in (570 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

48

Oz. (1.4 L)

TRANSMISSION:

K46

Type

Hydrostatic Tuff Torq K46

Hydraulic Fluid

10w 30 Premium Engine Oil

Capacity

2.6 qt (2,5 L)

Speeds

Forward: 0-5.5 MPH (0-8,8 km/h)

@ 3400 rpm

Reverse: 0-3.5 MPH (0-5,6 km/h)

Continuous Torque

215 ft. lbs. (291 N.m.)

Output

 

Drawbar Rating

440 lbs. (200 Kg)

Maximum Weight

584 lbs. (265 Kg)

on Axle

 

DIMENSIONS

Overall Length

109” (277 cm)

Length (Tractor Only)

76” (193 cm)

Overall Width

37” (94 cm)

Height

At Top of Seat: 44” (112 cm)

Weight (approx.)

 

16HP Tractor

695 lbs. (318 kg)

18 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Intek 406777

Horsepower

18

@ 3600 rpm

Displacement

40

Cu. in (656 cc)

Electrical System

12

Volt, 16 amp. Alternator, Battery: 230 CCA

Oil Capacity

1-7/8 qt. (1.9L)

CHASSIS:

Fuel Tank Cap.

Capacity: 2.5 Gallons (9.5 L)

Rear Wheels

Tire Size: 20 x 10 - 8

 

Inflation Pressure: 6-8 psi (,41-,55 bar)

Front Wheels

Tire Size: 15 x 6.00-6

 

Inflation Press.: 15 psi (,8-1,0 bar)

35

Image 37
Contents OPERATOR’S Manual Page Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceIdentification Numbers Identification NumbersSafety Decals Safety DecalsDecal Cutting Height Decal Transmission Release Decal Ignition PositionsOperational Safety Checks Safety IconsThrottle Control Throttle/Choke ControlHour Meter Optional Brake PedalFeatures & Controls Adding Fuel General Operating SafetyStopping the Tractor & Engine Operating the Tractor Emptying the Catcher Parking Brake FunctionStorage Attaching a TrailerRemoving the Mower Deck Mower Deck Removal InstallationMuffler and surrounding areas may be hot Installing the Mower Deck Catcher Removal InstallationInstall Mulch Plug Discharge Mulch Plug Installation & Removal Some ModelsPage Fall Before Every SpringTransmission Maintenance Regular MaintenanceBattery Maintenance Check Tire PressuresOil LubricationLubricate Rear Axle Shafts Service Interval YearlyCheck Mower Blade Timing Servicing the Mower Blades4x4 Wood Block PTO Clutch Adjustment Check Safety Interlock System CheckEngine Maintenance SET Mower Belt TensionTroubleshooting, Adjustments, & Service Troubleshooting the Mower Hopper Latch Adjustment Seat AdjustmentPitch Adjustment Seat Slide AdjustmentBrake Adjustment Steering Gear AdjustmentAdjustment Nut NutsCATCHER-FULL Alarm Adjustment Troubleshooting, Adjustment, & ServiceMower Lift Adjustment Battery ChargingAdjust PTO Clutch Window Adjustment Nut Feeler Gauge PTO Clutch AdjustmentTransmission Release Lever Transmission PurgingCutting Height Adjustment Mower AdjustmentsLeveling The Mower Arbor Drive Belt Replacement PTO Belt ReplacementSpecifications Maintenance Items Replacement PartsOptional Accessories Technical ManualsPage O D U C T S