Elation Professional MAGIC-260 Select a menu item then press enter. Save Memory File, Exit USB PC

Page 27

M a g i c 2 6 0

Section 23: ULink (Save Memory File)

This operation will allow you to transfer data from your controller to a standard PC or laptop. You must first install the Magic 260 application software and USB driver that was supplied with your ULink cable. You can also download these files from the Magic 260 webpage on our website at www.elationlighting.com. If you have not done so, please do so now then proceed to step 1 below.

(1)Connect the stick end, end with LED indicator, into a USB port on your computer and the opposite end into the USB port on your Magic 260.

(2)On the Magic 260, press the MENU button so your display reads the following:

Select a menu item then press enter. -Choose Fixtures -

(3) On the Magic 260, turn data wheel #1 until the display reads the following:

Select a menu item then press enter. - Save Memory File -

(4)On your computer, open the Magic 260 program by clicking START on the Windows taskbar, then click Programs or All programs, move mouse over Magic260 and click on “Magic260Save1.01”.

(5)On your computer, click “Select ULink” in the upper right hand corner of the Magic260 program.

(6)On your computer, click “Receive File”. A Send window will pop up. Select a destination to save your data to and type a name that you want your data saved as. (A message should appear in the lower right hand corner that reads “Waiting Receive Data”).

(7)On the Magic 260, press the ENTER button so your display reads the following:

Please select save to USB or PC.

EXIT USB PC

(8)On the Magic 260, press DATA wheel #3 to start the memory transfer. Your display should read the following during the transfer:

WRITE FILE (PC)	(XX%)
.....

The XX’s in parentheses represent progress percentage and the dots at the bottom represent a progress bar. As the transfer progresses, the percentage number and bar will increase. When the transfer is complete, your display should read “File Sent”. Repeat steps 1-8 to save additional memory files.

27

Image 27

Contents AG I C -2 6 Sections G I C 2 6 Table of ContentsG I C 2 6 General IntroductionSafety Information & Maintenance Copyright Updates & ChangesProduct Registration & Warranty Information Information NoticeFeatures and Specifications Auxiliary buttons Front Panel OverviewFunction buttons Fixture buttonContinue Front Panel Overview Fine button Fade faderSpeed fader Master faderBlackout button Small Data wheelAudio button Tapsync buttonRear Panel Overview Technical SpecificationsSet Up and Data Connections Flow ChartFixture Type Focus Spot-250 Select a menu item then press enter. -Choose FixturesFixture Type No FixtureThis Fixture does not Match Record & Patch Memory ? Do YOU Wish to CONTINUE? YESChoose Fixtures Continue Select a menu item then press enter. -Patch Fixture Fixture Channel Autopatch 001Patch Fixtures Patch Fixtures Continue Fixture Channel Autopatch XxxHelp Button Select a menu item then press enter. Lock/Unlock MemoryMemory Status Unlocked Auxiliary ButtonsRecord Scenes Record Scenes Continue Please select presetPresets Play Preset Movement & Record Movement as a ScenePlay Preset Movement & Record Movement as a Scene Continue Edit Preset Movement Offset Point and R adius Record Figure Menu 1.Record CircleRecord Figure Pan000 Tilt000 Fade02.0 Radius=20 Step Scene Hold 000 Start 00000 Step Scene Hold 001 Empty 00050Record Shows Show Name Manual Loop Unnamed Show OFFRecord Shows Continue Playback Shows Playback ScenesEdit Scene Playback Shows ContinueEdit Show Edit Scene ContinueWrite File PC Select a menu item then press enter. Save Memory FilePlease select save to USB or PC Exit USB PCULink Load Memory File Select a menu item then press enter. Load Memory FileRead File PC 00%USB MEM Stick Save Memory File ULink Load Memory File ContinueUSB MEM Stick Save Memory FileContinue Please set this file name, then enterUNNAME00 Write File USBUSB MEM Stick Delete & Format files in Memory Stick Please select file XX/XXXXXXXXXXUSB MEM Stick Load Memory File Select a menu item then press enter. Erase All Memory Erase All Memory YesNoErase All Memory Midi Midi Chart