Elation Professional MAGIC-260 Please set this file name, then enter, UNNAME00, Write File USB

Page 30

M a g i c 2 6 0

Section 25: USB MEM Stick (Save Memory File)(Continue)

On the Magic 260, press DATA wheel #2 to select USB. Your display should read the following:

Please set this file name, then (enter)

UNNAME00

(6)If you want to name the file, turn DATA wheel #1 to change the character and turn DATA wheel #5 to move the cursor over under the next character. Once you’ve named your file, press the ENTER button to store the file to the memory stick. Your display should read as follows:

WRITE FILE (USB)

(XX%)

.....

 

The XX’s in parentheses represent progress percentage and the dots at the bottom represent a progress bar. As the transfer progresses, the percentage number and bar will increase. When the transfer is complete, your display should read “File Sent”. Repeat steps 1-8 to save additional memory files.

Section 26: USB MEM Stick (Store USB Memory File to Computer)

This operation will allow you to store memory files from your USB Memory stick to your computer. You must first install the Magic 260 application software and USB driver that was supplied with your USB MEM Stick. If you have not done so, please do so now then proceed to step 1 below.

(1)Install the USB MEM Stick into a USB port on your computer.

(2)On your computer, open the Magic 260 program by clicking START on the Windows taskbar, then click Programs or All programs, move mouse over Magic260 and click on “Magic260Save1.01”.

(3)On your computer, click “Dirtory”. A list of files currently on the memory stick will appear in the UStick option box.

(4)On your computer, highlight the file that you wish to store to your computer by clicking on it once.

(5)Click “Read”. A Send file window will pop up and your file will be renamed with “MAGIC111” added to your original file name. NOTE: DO NOT CHANGE OR REMOVE “MAGIC111” AS THE FILE

MUST HAVE THIS ASSOCIATION TO RELOAD INTO MAGIC 260 LATER.

(6)On your computer, select a destination for your file such as “Desktop” and click “Open”. The transfer will begin immediately and should only take a few seconds to complete.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents AG I C -2 6 G I C 2 6 Table of Contents SectionsGeneral Introduction G I C 2 6Safety Information & Maintenance Information Notice Updates & ChangesProduct Registration & Warranty Information CopyrightFeatures and Specifications Fixture button Front Panel OverviewFunction buttons Auxiliary buttonsContinue Front Panel Overview Master fader Fade faderSpeed fader Fine buttonTapsync button Small Data wheelAudio button Blackout buttonTechnical Specifications Rear Panel OverviewFlow Chart Set Up and Data ConnectionsNo Fixture Select a menu item then press enter. -Choose FixturesFixture Type Fixture Type Focus Spot-250This Fixture does not Match Record & Patch Memory ? Do YOU Wish to CONTINUE? YESChoose Fixtures Continue Select a menu item then press enter. -Patch Fixture Fixture Channel Autopatch 001Patch Fixtures Fixture Channel Autopatch Xxx Patch Fixtures ContinueAuxiliary Buttons Select a menu item then press enter. Lock/Unlock MemoryMemory Status Unlocked Help ButtonRecord Scenes Play Preset Movement & Record Movement as a Scene Please select presetPresets Record Scenes ContinuePlay Preset Movement & Record Movement as a Scene Continue Edit Preset Movement Offset Point and R adius Record Figure Menu 1.Record CircleRecord Figure Pan000 Tilt000 Fade02.0 Radius=20 Step Scene Hold 000 Start 00000 Step Scene Hold 001 Empty 00050Record Shows Show Name Manual Loop Unnamed Show OFFRecord Shows Continue Playback Scenes Playback ShowsPlayback Shows Continue Edit SceneEdit Scene Continue Edit ShowExit USB PC Select a menu item then press enter. Save Memory FilePlease select save to USB or PC Write File PC00% Select a menu item then press enter. Load Memory FileRead File PC ULink Load Memory FileULink Load Memory File Continue USB MEM Stick Save Memory FileWrite File USB Please set this file name, then enterUNNAME00 USB MEM Stick Save Memory FileContinueUSB MEM Stick Delete & Format files in Memory Stick Please select file XX/XXXXXXXXXXUSB MEM Stick Load Memory File Select a menu item then press enter. Erase All Memory Erase All Memory YesNoErase All Memory Midi Midi Chart
Top Page Image Contents