Elation Professional MAGIC-260 Step Scene Hold 000 Start 00000, Step Scene Hold 001 Empty 00050

Page 22

M a g i c 2 6 0

Section 1 8: Record Shows

A show is a sequence of recorded scenes in which each step can incorporate different step hold times. Up to 288 shows with up to 255 steps can be stored to Magic 260s’ memory via 12 show pages. When playing back a show in auto mode, there is an internal clock that keeps track of every show cue. This allows you to trigger the show and let it r un on its own. You can also set the automatic trigger mode off so you can manually trigger the show cues via the GO button. YOU MUST FIRST RECORD SCENES BEFORE YOU CAN RECORD A SHOW. So if you haven’t already done so, do so now.

(1)Press the RECORD button so its green LED flashes.

(2)Press the SHOW button so its green LED flashes. Your display should read the following:

Step

Scene

Hold

Page

000

Start

00:00:0

01

 

 

 

 

(3)Turn DATA wheel #3 to set and incorporate a delay time for your show if desired. If you add a delay time, your show will not trigger instantly during playback. The show will be delayed the amount of time which you set in “Step 000” Hold time. For example, if you set the Hold time to 00:06:0, when this show is triggered for playback, there will be a 6 second delay before the show begins to play. Leave the Hold time set to 00:00:0 if you want the show to start immediately when triggered.

(4)Press the ENTER button to store your start setting. Your display should read as follows:

Step

Scene

Hold

Page

001

Empty

00:05:0

01

 

 

 

 

There is a default hold time of 5 seconds automatically set for each step.

(5)Press the SCENE button so its green LED illuminates ON solid.

(6)The current scene page should be 1 as indicated on the far right of your display. If you wish to change the scene page, turn DATA wheel #4 until you’ve reached the scene page that contains the scene you want in show step 1.

(7)Press the FUNCTION button (1- 24) that corresponds to the scene you want for the current show step. The relevant red FUNCTION LED should illuminate ON solid. Your display should also list the page # and scene # below “Scene”.

(8)As previously stated, there is a 5 second hold time automatically set for each show step. If you wish to change this hold time, turn DATA wheel #3 to set your new step hold time.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents AG I C -2 6 G I C 2 6 Table of Contents SectionsGeneral Introduction G I C 2 6Safety Information & Maintenance Information Notice Updates & ChangesProduct Registration & Warranty Information CopyrightFeatures and Specifications Fixture button Front Panel OverviewFunction buttons Auxiliary buttonsContinue Front Panel Overview Master fader Fade faderSpeed fader Fine buttonTapsync button Small Data wheelAudio button Blackout buttonTechnical Specifications Rear Panel OverviewFlow Chart Set Up and Data ConnectionsNo Fixture Select a menu item then press enter. -Choose FixturesFixture Type Fixture Type Focus Spot-250Do YOU Wish to CONTINUE? YES This Fixture does not Match Record & Patch Memory ?Choose Fixtures Continue Fixture Channel Autopatch 001 Select a menu item then press enter. -Patch FixturePatch Fixtures Fixture Channel Autopatch Xxx Patch Fixtures ContinueAuxiliary Buttons Select a menu item then press enter. Lock/Unlock MemoryMemory Status Unlocked Help ButtonRecord Scenes Play Preset Movement & Record Movement as a Scene Please select presetPresets Record Scenes ContinuePlay Preset Movement & Record Movement as a Scene Continue Record Figure Menu 1.Record Circle Edit Preset Movement Offset Point and R adiusRecord Figure Pan000 Tilt000 Fade02.0 Radius=20 Step Scene Hold 001 Empty 00050 Step Scene Hold 000 Start 00000Record Shows Unnamed Show OFF Show Name Manual LoopRecord Shows Continue Playback Scenes Playback ShowsPlayback Shows Continue Edit SceneEdit Scene Continue Edit ShowExit USB PC Select a menu item then press enter. Save Memory FilePlease select save to USB or PC Write File PC00% Select a menu item then press enter. Load Memory FileRead File PC ULink Load Memory FileULink Load Memory File Continue USB MEM Stick Save Memory FileWrite File USB Please set this file name, then enterUNNAME00 USB MEM Stick Save Memory FileContinueUSB MEM Stick Delete & Format files in Memory Stick XX/XXXXXXXXXX Please select fileUSB MEM Stick Load Memory File Erase All Memory YesNo Select a menu item then press enter. Erase All MemoryErase All Memory Midi Midi Chart
Top Page Image Contents