Elation Professional MAGIC-260 ULink Load Memory File Continue, USB MEM Stick Save Memory File

Page 29

M a g i c 2 6 0

Section 24: ULink (Load Memory File) (Continue)

(8)On your computer, click “Send File”. A Send window will pop up. Select the destination and memory file that you want to load into Magic 260 and click “Open”. (A message should appear in the lower right hand corner that reads “Sending”). During the transfer, your controllers display will read the following:

READ FILE (PC)

(XX%)

.......

 

 

 

The XX’s in parentheses represent progress percentage and the dots at the bottom represent a progress bar. As the transfer progresses, the percentage number and bar increase. When the transfer is complete, your display should read “Please switch power OFF then back ON”. Once you switch the power OFF then back ON, you will have successfully loaded your file.

Section 25: USB MEM Stick (Save Memory File)

This operation will allow you to transfer data from Magic 260 to our proprietary USB Memory stick. The total memory space available on the USB memory stick is 128mb- plenty of space to save all of your programs. You must first install the Magic 260 application software and USB driver that was supplied with your USB MEM Stick. If you have not done so, please do so now then proceed to step 1 below.

(1)Install the USB MEM Stick into the USB port on your Magic 260.

(2)Flip Magic 260’s power switch OFF then back ON.

(3)On the Magic 260, press the MENU button so your display reads the following:

Select a menu item then press enter. -Choose Fixtures -

(4) On the Magic 260, turn data wheel #1 until the display reads the following:

Select a menu item then press enter. - Save Memory File -

(5) On the Magic 260, press the ENTER button so your display reads the following:

Please select save to USB or PC.

EXIT USB PC

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents AG I C -2 6 Sections G I C 2 6 Table of ContentsG I C 2 6 General IntroductionSafety Information & Maintenance Product Registration & Warranty Information Updates & ChangesInformation Notice CopyrightFeatures and Specifications Function buttons Front Panel OverviewFixture button Auxiliary buttonsContinue Front Panel Overview Speed fader Fade faderMaster fader Fine buttonAudio button Small Data wheelTapsync button Blackout buttonRear Panel Overview Technical SpecificationsSet Up and Data Connections Flow ChartFixture Type Select a menu item then press enter. -Choose FixturesNo Fixture Fixture Type Focus Spot-250Choose Fixtures Continue This Fixture does not Match Record & Patch Memory ?Do YOU Wish to CONTINUE? YES Patch Fixtures Select a menu item then press enter. -Patch FixtureFixture Channel Autopatch 001 Patch Fixtures Continue Fixture Channel Autopatch XxxMemory Status Unlocked Select a menu item then press enter. Lock/Unlock MemoryAuxiliary Buttons Help ButtonRecord Scenes Presets Please select presetPlay Preset Movement & Record Movement as a Scene Record Scenes ContinuePlay Preset Movement & Record Movement as a Scene Continue Record Figure Pan000 Tilt000 Fade02.0 Radius=20 Edit Preset Movement Offset Point and R adiusRecord Figure Menu 1.Record Circle Record Shows Step Scene Hold 000 Start 00000Step Scene Hold 001 Empty 00050 Record Shows Continue Show Name Manual LoopUnnamed Show OFF Playback Shows Playback ScenesEdit Scene Playback Shows ContinueEdit Show Edit Scene ContinuePlease select save to USB or PC Select a menu item then press enter. Save Memory FileExit USB PC Write File PCRead File PC Select a menu item then press enter. Load Memory File00% ULink Load Memory FileUSB MEM Stick Save Memory File ULink Load Memory File ContinueUNNAME00 Please set this file name, then enterWrite File USB USB MEM Stick Save Memory FileContinueUSB MEM Stick Delete & Format files in Memory Stick USB MEM Stick Load Memory File Please select fileXX/XXXXXXXXXX Erase All Memory Select a menu item then press enter. Erase All MemoryErase All Memory YesNo Midi Midi Chart
Top Page Image Contents