Elation Professional MAGIC-260 Small Data wheel, Audio button, Tapsync button, Blackout button

Page 10

M A G I C - 2 6 0

Continue Section 6: Front Panel Overview

23. Small DATA wheel:

The small DATA wheel, wheel # 5, is used to view additional fixture channels. Four fixtures channels can be viewed in the LCD at a time. When this wheel is turned clockwise, the fixtures next four channels will display in the LCD. If turned counter clockwise, the previous four channels will display in the LCD.

24. AUDIO button:

The AUDIO button is used to activate sound mode. When this button is pressed, show steps will trigger via an internal microphone or a line level input . If you connect a line level input to the rear of the console, the controller will automatically use that circuit for audio triggering. If no line level input is detected, the internal microphone will be used.

25. TAPSYNC button:

The TAPSYNC button is used to manually tap a show step rate. When pressed two times, at a specific tempo, show steps will trigger to the tempo at which the button was pressed. This tempo will remain active until the Tapsync function is disengaged. Press and hold the TAPSYNC button for two seconds to disengage.

26. BLACKOUT button:

The BLACKOUT button is used to bring all fixture output down to zero.

10

Image 10

Contents AG I C -2 6 G I C 2 6 Table of Contents SectionsGeneral Introduction G I C 2 6Safety Information & Maintenance Information Notice Updates & ChangesProduct Registration & Warranty Information CopyrightFeatures and Specifications Fixture button Front Panel OverviewFunction buttons Auxiliary buttonsContinue Front Panel Overview Master fader Fade faderSpeed fader Fine buttonTapsync button Small Data wheelAudio button Blackout buttonTechnical Specifications Rear Panel OverviewFlow Chart Set Up and Data ConnectionsNo Fixture Select a menu item then press enter. -Choose FixturesFixture Type Fixture Type Focus Spot-250Do YOU Wish to CONTINUE? YES This Fixture does not Match Record & Patch Memory ?Choose Fixtures Continue Fixture Channel Autopatch 001 Select a menu item then press enter. -Patch FixturePatch Fixtures Fixture Channel Autopatch Xxx Patch Fixtures ContinueAuxiliary Buttons Select a menu item then press enter. Lock/Unlock MemoryMemory Status Unlocked Help ButtonRecord Scenes Play Preset Movement & Record Movement as a Scene Please select presetPresets Record Scenes ContinuePlay Preset Movement & Record Movement as a Scene Continue Record Figure Menu 1.Record Circle Edit Preset Movement Offset Point and R adiusRecord Figure Pan000 Tilt000 Fade02.0 Radius=20 Step Scene Hold 001 Empty 00050 Step Scene Hold 000 Start 00000Record Shows Unnamed Show OFF Show Name Manual LoopRecord Shows Continue Playback Scenes Playback ShowsPlayback Shows Continue Edit SceneEdit Scene Continue Edit ShowExit USB PC Select a menu item then press enter. Save Memory FilePlease select save to USB or PC Write File PC00% Select a menu item then press enter. Load Memory FileRead File PC ULink Load Memory FileULink Load Memory File Continue USB MEM Stick Save Memory FileWrite File USB Please set this file name, then enterUNNAME00 USB MEM Stick Save Memory FileContinueUSB MEM Stick Delete & Format files in Memory Stick XX/XXXXXXXXXX Please select fileUSB MEM Stick Load Memory File Erase All Memory YesNo Select a menu item then press enter. Erase All MemoryErase All Memory Midi Midi Chart