Elation Professional MAGIC-260 Please select file, Xx/Xxxxxxxxxx, USB MEM Stick Load Memory File

Page 32

M a g i c 2 6 0

Section 29: USB MEM Stick (Load Memory File)

This operation will allow you to transfer data from your USB Memory stick back into Magic 260.

(1)Install the USB MEM Stick into the USB port on your Magic 260.

(2)Flip the power switch OFF then back ON.

(3)On the Magic 260, press the MENU button so your display reads the following:

Select a menu item then press enter. -Choose Fixtures -

(4) On the Magic 260, turn data wheel #1 until the display reads the following:

Select a menu item then press enter. - Load Memory File -

(5) On the Magic 260, press the ENTER button so your display reads the following:

Please select save to USB or PC.

EXIT USB PC

(6) On the Magic 260, press DATA wheel #2 to select USB. Your display should read the following:

Please select file

XX/XX:XXXXXXXX

File names will appear in the order that they were stored or loaded into the memory stick. On the bottom left, it displays file number / and total number of files currently on the memory stick followed by the relevant file name.

(7)Turn DATA wheel #1 to search for the file that you wish to load.

(8)Press the ENTER button to load the selected file. The file will begin to load immediately. Once complete, the display will read “Please switch power OFF then back ON”. After doing so, your file will have been successfully loaded to Magic 260.

32

Image 32

Contents AG I C -2 6 G I C 2 6 Table of Contents SectionsGeneral Introduction G I C 2 6Safety Information & Maintenance Updates & Changes Product Registration & Warranty InformationInformation Notice CopyrightFeatures and Specifications Front Panel Overview Function buttonsFixture button Auxiliary buttonsContinue Front Panel Overview Fade fader Speed faderMaster fader Fine buttonSmall Data wheel Audio buttonTapsync button Blackout buttonTechnical Specifications Rear Panel OverviewFlow Chart Set Up and Data ConnectionsSelect a menu item then press enter. -Choose Fixtures Fixture TypeNo Fixture Fixture Type Focus Spot-250Choose Fixtures Continue This Fixture does not Match Record & Patch Memory ?Do YOU Wish to CONTINUE? YES Patch Fixtures Select a menu item then press enter. -Patch FixtureFixture Channel Autopatch 001 Fixture Channel Autopatch Xxx Patch Fixtures ContinueSelect a menu item then press enter. Lock/Unlock Memory Memory Status UnlockedAuxiliary Buttons Help ButtonRecord Scenes Please select preset PresetsPlay Preset Movement & Record Movement as a Scene Record Scenes ContinuePlay Preset Movement & Record Movement as a Scene Continue Record Figure Pan000 Tilt000 Fade02.0 Radius=20 Edit Preset Movement Offset Point and R adiusRecord Figure Menu 1.Record Circle Record Shows Step Scene Hold 000 Start 00000Step Scene Hold 001 Empty 00050 Record Shows Continue Show Name Manual LoopUnnamed Show OFF Playback Scenes Playback ShowsPlayback Shows Continue Edit SceneEdit Scene Continue Edit ShowSelect a menu item then press enter. Save Memory File Please select save to USB or PCExit USB PC Write File PCSelect a menu item then press enter. Load Memory File Read File PC00% ULink Load Memory FileULink Load Memory File Continue USB MEM Stick Save Memory FilePlease set this file name, then enter UNNAME00Write File USB USB MEM Stick Save Memory FileContinueUSB MEM Stick Delete & Format files in Memory Stick USB MEM Stick Load Memory File Please select fileXX/XXXXXXXXXX Erase All Memory Select a menu item then press enter. Erase All MemoryErase All Memory YesNo Midi Midi Chart