Snapper 24 HP North American Models only Safety Interlock System, Operational Safety Checks

Page 12

Safety

Safety Interlock System

NORTH AMERICAN

MODELS ONLY:

SAFETY INTERLOCK

SYSTEM

This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly.

Operational SAFETY Checks

Test 1 — Engine should NOT crank if:

•PTO switch is engaged, OR

•Parking brake is not engaged, OR

•Motion control handles are not in the NEUTRAL position.

Test 2 — Engine SHOULD crank and start if:

•PTO switch is NOT engaged, AND

•Parking brake is engaged, AND

•Motion control handles are locked in the NEUTRAL position.

Test 3 — Engine should SHUT OFF if:

•Operator rises off seat with PTO engaged, OR

•Operator rises off seat with parking brake disengaged.

•Operator moves motion control handles out of their neutral positions before disengaging parking brake.

Test 4 — Blade Brake Check

Mower blades and mower drive belt should come to a complete stop within five (5) seconds after electric PTO switch is turned off (or operator rises off seat). If mower drive belt does not stop within five (5) seconds, see your dealer.

NOTE: Once the engine has stopped, PTO switch must be turned off, parking brake must be engaged, and the motion control handles must be locked in the NEUTRAL position after the operator returns to the seat in order to start the engine.

WARNING

If the unit does not pass a safety test, do not operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

EXPORT MODELS ONLY:

SAFETY INTERLOCK

SYSTEM

This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly.

Operational SAFETY Checks

Test 1 — Engine should NOT crank if:

•PTO switch is engaged, OR

•Parking brake is not engaged, OR

•Motion control handles are not in the NEUTRAL position.

Test 2 — Engine SHOULD crank and start if:

•PTO switch is NOT engaged, AND

•Parking brake is engaged, AND

•Motion control handles are locked in the NEUTRAL position, AND

•Operator is in seat.

Test 3 — Engine should SHUT OFF if:

•Operator rises off seat under any condition.

•Operator moves motion control handles out of their neutral positions before disengaging parking brake.

Test 4 — Blade Brake Check

Mower blades and mower drive belt should come to a complete stop within five (5) seconds after electric PTO switch is turned off (or operator rises off seat). If mower drive belt does not stop within five (5) seconds, see your dealer.

NOTE: Once the engine has stopped, PTO switch must be turned off, parking brake must be engaged, and the motion control handles must be locked in the NEUTRAL position after the operator returns to the seat in order to start the engine.

WARNING

If the unit does not pass a safety test, do not operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

10

www.simplicitymfg.com www.snapper.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual 24HP Zero-Turn RidersDate Purchased Table of Contents Operating Safety Safety Rules & InformationSlope Operation Retaining Walls, Drop-offs, and Water General Operation Safety Rules and Information Slope OperationService & Maintenance Safe Handling of GasolineIdentification Numbers Safety Decals Safety DecalsNorth American Models CE Export ModelsSafety Interlock System North American Models only Safety Interlock SystemExport Models only Safety Interlock System Operational Safety ChecksSafety Icons North American Safety IconsCE Export Safety Icons ServicingFeatures & Controls Control FunctionsPTO Switch Seat Adjustment LeverHour Meter Transmission Oil FillGeneral Operating Safety OperationChecks Before Starting Starting the Engine Stopping the Rider and EnginePushing the Rider by Hand Zero Turn Driving Practice Smooth TravelForward Travel Practice Reverse Travel PracticePractice Turning Around a Corner Executing an End-Of-Row Zero TurnExecuting Turns TurningMower Removal Installation InstallationRemoval Mowing Mowing RecommendationsHeight of Grass Tall Grass Requires Incremental CuttingWhen and How Often to Mow Mowing MethodsMowing Patterns Proper Broadcast MowingAttaching a Trailer Proper MulchingRegular Maintenance Before Every Spring Each Hours 100 200 Fall UseCheck Transmission Oil Change Transmission Oil Filter Lubrication GreaseOil Arm PivotServicing the Mower Blades Removing the Mower BladeInspecting the Mower Blades Reinstalling the Mower Blades Sharpening the Mower BladeBalancing the Mower Blades NailCheck Tire Pressures Adding FuelFuel Filter Tire PressureEngine Maintenance Change Engine OIL & FilterCheck / Fill Transmission OIL Transmission OIL Filter ChangeChange Interval Every 200 Hours Battery Maintenance Cleaning the Battery and CablesStorage Troubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerTroubleshooting Common Cutting Problems StreakingSeat Adjustment Ground Speed Control Lever AdjustmentSeat Position Adjustment Speed Balancing Adjustment Cutting Height AdjustmentNeutral Adjustment Parking Brake Adjustment Suspension Adjustment A. Front Shock Adjustment CollarPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideMower Belt Replacement Roller BAR Leveling Select ModelsHydraulic Pump Drive Belt Replacement Battery ChargingSpecifications Technical ManualsPage Product Quick Specs Belts and Blades Tractor

24 HP specifications

The Snapper 24 HP is a powerful and reliable riding lawn mower designed to tackle large lawns and challenging terrains with ease. With its robust engine and advanced features, it offers a premium mowing experience for homeowners and professionals alike.

At the heart of the Snapper 24 HP is a dependable 24 horsepower (HP) Briggs & Stratton engine. This high-performance engine provides ample power to efficiently cut through thick grass and maintain exhilarating speed while mowing. The engine is equipped with an overhead valve design, promoting better fuel efficiency and lower emissions, making it an environmentally friendly option.

One of the standout features of the Snapper 24 HP is its 42-inch cutting deck, which provides a wide cutting path for improved mowing efficiency. The deck is made from durable steel, designed to withstand the rigors of regular use, while also ensuring a clean and precise cut. It offers multiple cutting height adjustments, allowing users to customize their lawn's height from 1.5 to 4 inches, catering to various grass types and seasonal needs.

Additionally, the Snapper 24 HP comes with a hydrostatic transmission system that allows for smooth forward and reverse operation. This technology not only enhances maneuverability but also makes it easier to navigate obstacles such as trees and garden beds without the need for constant gear shifting. As a result, users can enjoy a more efficient mowing experience while reducing fatigue.

Comfort is prioritized in the design of the Snapper 24 HP. It features an ergonomic seat and easy-to-reach controls, ensuring that users can mow their lawns for extended periods without discomfort. The removable engine cover allows for quick access to the engine for maintenance and repairs, enabling users to keep their equipment running in top condition.

Furthermore, the Snapper 24 HP is equipped with a warranty that underscores its durability and reliability. With its combination of power, versatility, and user-friendly features, the Snapper 24 HP stands out as an ideal choice for anyone looking to maintain an impeccably manicured lawn. Whether you are a seasoned lawn care professional or a homeowner who takes pride in their outdoor space, the Snapper 24 HP delivers performance and innovation you can trust.
Top Page Image Contents