Snapper 24 HP manual Specifications, Technical Manuals

Page 42

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

ENGINE:

24 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

44M7770113E1

Horsepower

24 @ 3500 rpm

Displacement

34.75 Cu. in (570 cc)

Electrical System

12 Volt, 16 amp. Alternator, Battery: 340

Oil Capacity

CCA

4 US pt. (1.9 L) w/ Filter

CHASSIS:

 

Fuel Tank

Capacity: 6.5 Gallons (24.6 L)

Rear Wheels

Tire Size: 20 x 8.00 -10

Front Wheels

Inflation Pressure: 15 psi (1,03 bar)

Tire Size: 11 x 4.00-5

 

Inflation Pressure: 40 psi (2,76 bar)

TRANSMISSIONS:

HydroGear ZK-GMEE-3L7B-1YLX (RH) HydroGear ZK-KMEE-3L7C-1YLX (LH)

Type

ZT2800

Hydraulic Fluid

20W-50 conventional detergent motor oil

Speeds

Forward: 0-7 MPH (0-11.27 km/h)

@3400 rpmReverse: 0-5 MPH (0-8.05 km/h)

Continuous Torque

180 ft. lbs. (244 N.m.)

Output

 

Maximum Weight

440 lbs. (200 Kg) per Axle

on Axle

 

DIMENSIONS:

Overall Length

78” (190,5 cm)

Overall Width

41.5” (105 cm)

Height

42” (107 cm)

Weight (apx.)

 

With 50” Mower Deck

723 lbs. (328 kg)

With 44” Mower Deck

712 lbs. (322 kg)

Specifications

Engine Power Rating Information

The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

Technical Manuals

Technical Manuals

Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the product’s components in exploded views (3D illustrations which show the relationship of parts

and how they go together) as well as part numbers and quantities used. Important assembly notes and and torque values are also included.

For applicable manuals currently available for your model, contact our Customer Publications Department at 262-284-8519 (Simplicity) / 866-313-6682 (Snapper). Have the model and serial information for your machines available when phoning in your request.

Technical manuals can be downloaded from

www.simplicitymfg.com www.snapper.com

40

www.simplicitymfg.com www.snapper.com

Image 42
Contents OPERATOR’S Manual 24HP Zero-Turn RidersDate Purchased Table of Contents Operating Safety Safety Rules & InformationSlope Operation Retaining Walls, Drop-offs, and Water General Operation Safety Rules and Information Slope OperationService & Maintenance Safe Handling of GasolineIdentification Numbers North American Models Safety DecalsSafety Decals CE Export ModelsExport Models only Safety Interlock System Safety Interlock SystemNorth American Models only Safety Interlock System Operational Safety ChecksCE Export Safety Icons Safety IconsNorth American Safety Icons ServicingFeatures & Controls Control FunctionsHour Meter PTO SwitchSeat Adjustment Lever Transmission Oil FillGeneral Operating Safety OperationChecks Before Starting Starting the Engine Stopping the Rider and EnginePushing the Rider by Hand Forward Travel Practice Zero Turn Driving PracticeSmooth Travel Reverse Travel PracticeExecuting Turns Practice Turning Around a CornerExecuting an End-Of-Row Zero Turn TurningMower Removal Installation InstallationRemoval Height of Grass MowingMowing Recommendations Tall Grass Requires Incremental CuttingMowing Patterns When and How Often to MowMowing Methods Proper Broadcast MowingAttaching a Trailer Proper MulchingRegular Maintenance Before Every Spring Each Hours 100 200 Fall UseCheck Transmission Oil Change Transmission Oil Filter Oil LubricationGrease Arm PivotServicing the Mower Blades Removing the Mower BladeInspecting the Mower Blades Balancing the Mower Blades Reinstalling the Mower BladesSharpening the Mower Blade NailFuel Filter Check Tire PressuresAdding Fuel Tire PressureEngine Maintenance Change Engine OIL & FilterCheck / Fill Transmission OIL Transmission OIL Filter ChangeChange Interval Every 200 Hours Battery Maintenance Cleaning the Battery and CablesStorage Troubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerTroubleshooting Common Cutting Problems StreakingSeat Adjustment Ground Speed Control Lever AdjustmentSeat Position Adjustment Speed Balancing Adjustment Cutting Height AdjustmentNeutral Adjustment Parking Brake Adjustment Suspension Adjustment A. Front Shock Adjustment CollarPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideMower Belt Replacement Roller BAR Leveling Select ModelsHydraulic Pump Drive Belt Replacement Battery ChargingSpecifications Technical ManualsPage Product Quick Specs Belts and Blades Tractor

24 HP specifications

The Snapper 24 HP is a powerful and reliable riding lawn mower designed to tackle large lawns and challenging terrains with ease. With its robust engine and advanced features, it offers a premium mowing experience for homeowners and professionals alike.

At the heart of the Snapper 24 HP is a dependable 24 horsepower (HP) Briggs & Stratton engine. This high-performance engine provides ample power to efficiently cut through thick grass and maintain exhilarating speed while mowing. The engine is equipped with an overhead valve design, promoting better fuel efficiency and lower emissions, making it an environmentally friendly option.

One of the standout features of the Snapper 24 HP is its 42-inch cutting deck, which provides a wide cutting path for improved mowing efficiency. The deck is made from durable steel, designed to withstand the rigors of regular use, while also ensuring a clean and precise cut. It offers multiple cutting height adjustments, allowing users to customize their lawn's height from 1.5 to 4 inches, catering to various grass types and seasonal needs.

Additionally, the Snapper 24 HP comes with a hydrostatic transmission system that allows for smooth forward and reverse operation. This technology not only enhances maneuverability but also makes it easier to navigate obstacles such as trees and garden beds without the need for constant gear shifting. As a result, users can enjoy a more efficient mowing experience while reducing fatigue.

Comfort is prioritized in the design of the Snapper 24 HP. It features an ergonomic seat and easy-to-reach controls, ensuring that users can mow their lawns for extended periods without discomfort. The removable engine cover allows for quick access to the engine for maintenance and repairs, enabling users to keep their equipment running in top condition.

Furthermore, the Snapper 24 HP is equipped with a warranty that underscores its durability and reliability. With its combination of power, versatility, and user-friendly features, the Snapper 24 HP stands out as an ideal choice for anyone looking to maintain an impeccably manicured lawn. Whether you are a seasoned lawn care professional or a homeowner who takes pride in their outdoor space, the Snapper 24 HP delivers performance and innovation you can trust.