Snapper 24 HP manual Slope Operation

Page 5

Safety Rules & Information

Slope Operation

Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not have adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollover. You should not operate on a slope greater than a 3.5 foot rise over a 20 foot length (10 degrees).

Always mow across slopes, not up and down (to maintain traction on the wheels) and avoid sudden turns or rapid speed changes. Reduce speed and use extreme caution on ALL slopes.

Also, note that the surface condition you are on can greatly impact your ability to safely operate this machine. Operating on wet or slippery slopes can cause sliding and loss of steering and control. Do not operate on slopes that are slippery, wet, or have soft soil conditions.

If you feel unsure about operating the unit on a slope, don’t do it.

It’s not worth the risk.

Thrown Objects

This unit has spinning mower blades. These blades can pick up and throw debris that could seriously injure a bystander. Be sure to clean up the area to be mowed and remove objects that could be thrown by the blade BEFORE you start mowing.

Do not operate this unit without the entire grass catcher or discharge guard (deflector) in place.

Also, do not allow anyone in the area while the unit is running! If someone does enter the area, shut the unit off immediately until they leave.

Moving Parts

This equipment has many moving parts that can injure you or someone else. However, if you stay in the operator zone (stay seated in the seat), and follow the safety rules in this operator’s manual, the unit is safe to operate.

The mower deck has spinning mower blades that can amputate hands and feet. Do not allow anyone near the unit while it is running! Keep safety devices (guards, shields, and switches) in place and working.

To help you, the operator, use this equipment safely, it is equipped with an operator-present safety system. Do NOT attempt to alter or bypass the system. See your dealer immediately if the system does not pass all the safety interlock system tests found in this manual.

Safety

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 24HP Zero-Turn Riders OPERATOR’S ManualDate Purchased Table of Contents Safety Rules & Information Operating SafetySlope Operation Retaining Walls, Drop-offs, and Water General Operation Slope Operation Safety Rules and InformationSafe Handling of Gasoline Service & MaintenanceIdentification Numbers Safety Decals Safety DecalsNorth American Models CE Export ModelsNorth American Models only Safety Interlock System Safety Interlock SystemExport Models only Safety Interlock System Operational Safety ChecksNorth American Safety Icons Safety IconsCE Export Safety Icons ServicingControl Functions Features & ControlsSeat Adjustment Lever PTO SwitchHour Meter Transmission Oil FillChecks Before Starting General Operating SafetyOperation Pushing the Rider by Hand Starting the EngineStopping the Rider and Engine Smooth Travel Zero Turn Driving PracticeForward Travel Practice Reverse Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerExecuting Turns TurningRemoval Mower Removal InstallationInstallation Mowing Recommendations MowingHeight of Grass Tall Grass Requires Incremental CuttingMowing Methods When and How Often to MowMowing Patterns Proper Broadcast MowingProper Mulching Attaching a TrailerCheck Transmission Oil Change Transmission Oil Filter Regular MaintenanceBefore Every Spring Each Hours 100 200 Fall Use Grease LubricationOil Arm PivotInspecting the Mower Blades Servicing the Mower BladesRemoving the Mower Blade Sharpening the Mower Blade Reinstalling the Mower BladesBalancing the Mower Blades NailAdding Fuel Check Tire PressuresFuel Filter Tire PressureChange Engine OIL & Filter Engine MaintenanceChange Interval Every 200 Hours Check / Fill Transmission OILTransmission OIL Filter Change Storage Battery MaintenanceCleaning the Battery and Cables Troubleshooting the Rider Troubleshooting, Adjustments, & ServiceTroubleshooting the Mower Troubleshooting, Adjustments, & ServiceStreaking Troubleshooting Common Cutting ProblemsSeat Position Adjustment Seat AdjustmentGround Speed Control Lever Adjustment Neutral Adjustment Speed Balancing AdjustmentCutting Height Adjustment Suspension Adjustment A. Front Shock Adjustment Collar Parking Brake AdjustmentBlade Brake Check PTO Clutch AdjustmentOrient Blades Side-to-Side Mower Deck LevelingRoller BAR Leveling Select Models Mower Belt ReplacementBattery Charging Hydraulic Pump Drive Belt ReplacementTechnical Manuals SpecificationsPage Belts and Blades Tractor Product Quick Specs

24 HP specifications

The Snapper 24 HP is a powerful and reliable riding lawn mower designed to tackle large lawns and challenging terrains with ease. With its robust engine and advanced features, it offers a premium mowing experience for homeowners and professionals alike.

At the heart of the Snapper 24 HP is a dependable 24 horsepower (HP) Briggs & Stratton engine. This high-performance engine provides ample power to efficiently cut through thick grass and maintain exhilarating speed while mowing. The engine is equipped with an overhead valve design, promoting better fuel efficiency and lower emissions, making it an environmentally friendly option.

One of the standout features of the Snapper 24 HP is its 42-inch cutting deck, which provides a wide cutting path for improved mowing efficiency. The deck is made from durable steel, designed to withstand the rigors of regular use, while also ensuring a clean and precise cut. It offers multiple cutting height adjustments, allowing users to customize their lawn's height from 1.5 to 4 inches, catering to various grass types and seasonal needs.

Additionally, the Snapper 24 HP comes with a hydrostatic transmission system that allows for smooth forward and reverse operation. This technology not only enhances maneuverability but also makes it easier to navigate obstacles such as trees and garden beds without the need for constant gear shifting. As a result, users can enjoy a more efficient mowing experience while reducing fatigue.

Comfort is prioritized in the design of the Snapper 24 HP. It features an ergonomic seat and easy-to-reach controls, ensuring that users can mow their lawns for extended periods without discomfort. The removable engine cover allows for quick access to the engine for maintenance and repairs, enabling users to keep their equipment running in top condition.

Furthermore, the Snapper 24 HP is equipped with a warranty that underscores its durability and reliability. With its combination of power, versatility, and user-friendly features, the Snapper 24 HP stands out as an ideal choice for anyone looking to maintain an impeccably manicured lawn. Whether you are a seasoned lawn care professional or a homeowner who takes pride in their outdoor space, the Snapper 24 HP delivers performance and innovation you can trust.
Top Page Image Contents