Snapper 2167519B specifications Maintenance Maintenance Introduction, Service After First 5 Hours

Page 12

Maintenance

Maintenance - Introduction

To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention the model and serial number.

Check Grease Level in Transmission

1.Remove the transmission fill plug (A, Figure 17). Roll the machine forward or backward while looking down into the plug hole.

2.If liquid grease is not visible on the input gear (the small gear below the plug hole), add an amount, to cover the gear, of Snapper “00” grease.

Maintenance

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

Service - After First 5 Hours

Change Engine Oil

1.Refer to the Engine Manual for proper oil specifications, procedures and proper service intervals.

2.For the simplest/cleanest oil change, simply turn the mower on its side to drain the oil, as shown. Drain the oil through the dipstick tube (A, Figure 16) into a container. Allow sufficient time for all the oil to drain.

Important: Drain the fuel tank before tipping the machine. DO NOT tip the machine with the carburetor or spark plug down. Oil from the crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

A

Figure 16: Draining the engine oil

3.Dispose of drain oil properly.

4.Fill the engine with oil as specified in the Engine Manual. Do not overfill.

A

Figure 17: Removing the transmission fill plug

Note: Snapper “00” grease (Part No. 7029443) is available at your Snapper dealer.

Note: Do not spill grease or oil onto the surface of the drive disc (A, Figure 18).

A

Figure 18: Location of the drive disc

3.Reinstall the transmission plug.

4.Check the grease level after each 25 hours of operation.

Important: Drain the fuel tank before tipping the mower. DO NOT tip the machine with the carburetor or spark plug down. Oil from the crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

10

www.snapper.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Steel Deck Walk Mowers Series Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Protection for Children Slope OperationPreparation From Previous Column PreparationMaintenance and Storage Safe Handling of Gasoline From PreviousOperation Operation From Previous ColumnFeatures and Controls Features and ControlsOperation Pre-Start Check List Starting and OperationEngine and Blade Briggs Engines Handle Height Adjustment OperationStopping Engine and Blade Kawasaki EngineCutting Height Adjustment Recycling OperationRemoving the Recycling Cover Installing the Discharge Deflector Installing the Grass Bag AdapterInstalling the Recycling Plug Installing the Grass BagMaintenance Maintenance Introduction Service After First 5 HoursCheck Grease Level in Transmission Change Engine OilMaintenance Service PeriodicStorage Procedure Mower Blade Replacement Standard Blade Wear LimitNinja Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Self-Propelled Models Only Driven and Drive Disc Service Cleaning Drive Disc & Driven DiscDrive Spring Repair/Replacement Driven Disc AdjustmentDriven Disc Replacement Adjusting the driven discDriven Disc Bearing Replacement Removing the driven disc assemblyBelt Service Engine Drive Belt Replacement Stretch Type BeltsReplacing the Bearing On the Pulley End Of the Hex Shaft Transmission Poly-V Belt Replacement ProcedureMaintenance Battery Service New Battery PreparationBattery Service Battery StorageService Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Page Page Page Product Specifications Common Service Parts

2167519B specifications

Snapper 2167519B represents a sophisticated approach to outdoor power equipment, designed to meet the needs of both casual users and professional landscapers. This high-performance walk-behind mower is engineered for efficiency, durability, and convenience, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Snapper 2167519B is its robust 190cc engine. This powerful engine provides ample torque and performance, enabling the mower to easily tackle a variety of grass types and terrains. The engine is designed for easy starting and reliable operation, ensuring that users can get to work without the frustrations often associated with small engines.

The Snapper 2167519B is equipped with a 21-inch cutting deck, which strikes a balance between maneuverability and cutting capacity. This size is ideal for residential lawns and smaller commercial properties, making it versatile for different mowing needs. The deck is constructed from high-quality materials to withstand the rigors of frequent use, and it features a design that promotes efficient grass clipping discharge, whether mulching, bagging, or side discharging.

Another key characteristic of the Snapper 2167519B is its height adjustment feature, which allows users to easily modify cutting heights between 1 to 4 inches. This feature accommodates various grass types and user preferences, ensuring a clean and even cut every time.

User comfort is also a priority for the Snapper 2167519B. The mower features ergonomic handlebars designed to reduce fatigue during extended operation. Additionally, the self-propelled option enhances ease of use, allowing users to navigate hilly terrains or dense grass with minimal effort.

In terms of technology, the Snapper 2167519B includes a rear-wheel drive system, which provides excellent traction and stability on uneven surfaces. The design also features larger rear wheels that enhance maneuverability and ease of turning.

In summary, the Snapper 2167519B is a compelling choice for anyone in need of a dependable and efficient walk-behind mower. With its powerful engine, versatile cutting capabilities, and user-friendly features, this mower is well-suited for a variety of lawn care tasks, delivering quality performance season after season. Whether for residential use or light commercial applications, the Snapper 2167519B stands out as a reliable and effective tool for maintaining any lawn.
Top Page Image Contents