Snapper 2167519B Belt Service, Replacing the Bearing On the Pulley End Of the Hex Shaft

Page 19

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Replacing the Bearing On the Pulley End Of the Hex Shaft

To replace the bearing on the pulley end of the hex shaft, proceed as follows:

1.Hold the hex shaft with an adjustable wrench held next to the pulley.

2.Remove the 3/8” hex lock nut (B, Figure 33), located on the outside of the right wheel bracket.

3.Remove the holder (A), O-ring (C) and bearing (D).

4.Install the new bearing.

5.Carefully install the new O-ring over the outside of the new bearing.

6.Install the bearing holder, and secure with screws.

7.Install the 3/8” hex lock nut.

D

C

Belt Service

On self-propelled mowers, the engine belt (A, Figure 34) transmits power from the engine pulley (B) to the drive disc

(C). The drive disc powers the poly-v belt, which engages the transmission that powers the rear wheels. Should these belts become worn, they could cause slippage, which would impair mower performance. The condition of the engine belt and poly-v belt should be checked after every 25 hours of mower operation.

Engine Drive Belt Replacement (Stretch Type Belts)

1.Empty the fuel tank.

2.Note the belt routing (Figure 34). There is no idler pulley on these models to disconnect.

A

C

B

Figure 34: Engine drive belt routing

Maintenance

B

A

Figure 33: Replacing the hex shaft bearing

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Steel Deck Walk Mowers Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentTable of Contents Preparation Protection for ChildrenSlope Operation Preparation From Previous ColumnOperation From Previous Column Maintenance and StorageSafe Handling of Gasoline From Previous OperationFeatures and Controls Features and ControlsStarting and Operation Operation Pre-Start Check ListEngine and Blade Briggs Engines Engine and Blade Kawasaki Engine Handle Height AdjustmentOperation StoppingRecycling Operation Cutting Height AdjustmentRemoving the Recycling Cover Installing the Grass Bag Adapter Installing the Discharge DeflectorInstalling the Grass Bag Installing the Recycling PlugChange Engine Oil Maintenance Maintenance IntroductionService After First 5 Hours Check Grease Level in TransmissionService Periodic MaintenanceStorage Procedure Blade Sharpening Mower Blade ReplacementStandard Blade Wear Limit Ninja Blade Wear LimitWheel Drive Control Adjustment Self-Propelled Models Only Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementAdjusting the driven disc Driven Disc ReplacementRemoving the driven disc assembly Driven Disc Bearing ReplacementEngine Drive Belt Replacement Stretch Type Belts Belt ServiceReplacing the Bearing On the Pulley End Of the Hex Shaft Procedure Transmission Poly-V Belt ReplacementBattery Storage Maintenance Battery ServiceNew Battery Preparation Battery ServiceMaintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Page Page Page Common Service Parts Product Specifications

2167519B specifications

Snapper 2167519B represents a sophisticated approach to outdoor power equipment, designed to meet the needs of both casual users and professional landscapers. This high-performance walk-behind mower is engineered for efficiency, durability, and convenience, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Snapper 2167519B is its robust 190cc engine. This powerful engine provides ample torque and performance, enabling the mower to easily tackle a variety of grass types and terrains. The engine is designed for easy starting and reliable operation, ensuring that users can get to work without the frustrations often associated with small engines.

The Snapper 2167519B is equipped with a 21-inch cutting deck, which strikes a balance between maneuverability and cutting capacity. This size is ideal for residential lawns and smaller commercial properties, making it versatile for different mowing needs. The deck is constructed from high-quality materials to withstand the rigors of frequent use, and it features a design that promotes efficient grass clipping discharge, whether mulching, bagging, or side discharging.

Another key characteristic of the Snapper 2167519B is its height adjustment feature, which allows users to easily modify cutting heights between 1 to 4 inches. This feature accommodates various grass types and user preferences, ensuring a clean and even cut every time.

User comfort is also a priority for the Snapper 2167519B. The mower features ergonomic handlebars designed to reduce fatigue during extended operation. Additionally, the self-propelled option enhances ease of use, allowing users to navigate hilly terrains or dense grass with minimal effort.

In terms of technology, the Snapper 2167519B includes a rear-wheel drive system, which provides excellent traction and stability on uneven surfaces. The design also features larger rear wheels that enhance maneuverability and ease of turning.

In summary, the Snapper 2167519B is a compelling choice for anyone in need of a dependable and efficient walk-behind mower. With its powerful engine, versatile cutting capabilities, and user-friendly features, this mower is well-suited for a variety of lawn care tasks, delivering quality performance season after season. Whether for residential use or light commercial applications, the Snapper 2167519B stands out as a reliable and effective tool for maintaining any lawn.
Top Page Image Contents