Snapper 2167519B specifications Wheel Drive Control Adjustment Self-Propelled Models Only

Page 15

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Blade Sharpening (Continued)

4.Sharpen the blade on a grinding wheel at an angle of 22 to 28 degrees (B, Figure 23). DO NOT sharpen the blade beyond the original cutting edge (A).

Do not sharpen beyond original cutting edge

22-280

G

D

F

D

A

B

C

E

A

C

B

End view of blade assembly

A

Figure 23: Sharpening the mower blade

5.Check blade for balance. If necessary, correct balance by grinding heavy end of blade.

6.Reinstall blade (B, Figure 22). Note the correct assembly order:

(A)Blade hub

(B)Blade

(C)Blade flange (facing up)

(D)Cone washer (concave side up)

(E)Capscrew

7.Check torque of blade retaining cap screw. Recommended torque should be 40 ft. lbs.

Figure 24: Wheel drive control adjustment

2.To adjust, unhook the upper spring (D) from the cable eye and rotate the spring in the direction required to extend or shorten the spring length.

3.Rehook the upper spring to the cable eye and check clearance. Repeat the procedure if required.

Note: The vinyl spring cover (B) should be kept over the spring at all times except for adjustments.

4.If the wheel drive control fails to return quickly to the “OFF” position when released, check for binding at the cable holdings located on the side of the right handle. The upper clip should be located 2” below the upper knob; the lower clip should be 4” above the lower knob. The cable should slide freely with the clips installed at these locations.

Maintenance

Wheel Drive Control Adjustment (Self-Propelled Models Only)

1.The wheel drive control is properly adjusted when there is 1/16” to 1/8” clearance (G, Figure 24) between the inside of the spring hook (E) and the inside of the clutch cable eye (C) with the wheel drive control released.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Steel Deck Walk Mowers Series Engine Date of Purchase Retailer Retailers Phone Number EquipmentTable of Contents Preparation Protection for ChildrenSlope Operation Preparation From Previous ColumnOperation From Previous Column Maintenance and StorageSafe Handling of Gasoline From Previous OperationFeatures and Controls Features and ControlsOperation Pre-Start Check List Starting and OperationEngine and Blade Briggs Engines Engine and Blade Kawasaki Engine Handle Height AdjustmentOperation StoppingCutting Height Adjustment Recycling OperationRemoving the Recycling Cover Installing the Grass Bag Adapter Installing the Discharge DeflectorInstalling the Grass Bag Installing the Recycling PlugChange Engine Oil Maintenance Maintenance IntroductionService After First 5 Hours Check Grease Level in TransmissionMaintenance Service PeriodicStorage Procedure Blade Sharpening Mower Blade ReplacementStandard Blade Wear Limit Ninja Blade Wear LimitWheel Drive Control Adjustment Self-Propelled Models Only Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementAdjusting the driven disc Driven Disc ReplacementRemoving the driven disc assembly Driven Disc Bearing ReplacementBelt Service Engine Drive Belt Replacement Stretch Type BeltsReplacing the Bearing On the Pulley End Of the Hex Shaft Procedure Transmission Poly-V Belt ReplacementBattery Storage Maintenance Battery ServiceNew Battery Preparation Battery ServiceMaintenance/Replacement Parts Service ScheduleProbable Cause Corrective Action TroubleshootingYear Limited Warranty Page Page Page Common Service Parts Product Specifications

2167519B specifications

Snapper 2167519B represents a sophisticated approach to outdoor power equipment, designed to meet the needs of both casual users and professional landscapers. This high-performance walk-behind mower is engineered for efficiency, durability, and convenience, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Snapper 2167519B is its robust 190cc engine. This powerful engine provides ample torque and performance, enabling the mower to easily tackle a variety of grass types and terrains. The engine is designed for easy starting and reliable operation, ensuring that users can get to work without the frustrations often associated with small engines.

The Snapper 2167519B is equipped with a 21-inch cutting deck, which strikes a balance between maneuverability and cutting capacity. This size is ideal for residential lawns and smaller commercial properties, making it versatile for different mowing needs. The deck is constructed from high-quality materials to withstand the rigors of frequent use, and it features a design that promotes efficient grass clipping discharge, whether mulching, bagging, or side discharging.

Another key characteristic of the Snapper 2167519B is its height adjustment feature, which allows users to easily modify cutting heights between 1 to 4 inches. This feature accommodates various grass types and user preferences, ensuring a clean and even cut every time.

User comfort is also a priority for the Snapper 2167519B. The mower features ergonomic handlebars designed to reduce fatigue during extended operation. Additionally, the self-propelled option enhances ease of use, allowing users to navigate hilly terrains or dense grass with minimal effort.

In terms of technology, the Snapper 2167519B includes a rear-wheel drive system, which provides excellent traction and stability on uneven surfaces. The design also features larger rear wheels that enhance maneuverability and ease of turning.

In summary, the Snapper 2167519B is a compelling choice for anyone in need of a dependable and efficient walk-behind mower. With its powerful engine, versatile cutting capabilities, and user-friendly features, this mower is well-suited for a variety of lawn care tasks, delivering quality performance season after season. Whether for residential use or light commercial applications, the Snapper 2167519B stands out as a reliable and effective tool for maintaining any lawn.
Top Page Image Contents