Snapper 2167519B specifications Driven and Drive Disc Service, Cleaning Drive Disc & Driven Disc

Page 16

Maintenance (Continued)

Maintenance

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Driven and Drive Disc Service

If the mower does not propel itself properly, check for the following problems:

C

D

B

E

A

Figure 25: Wheel drive components

1.Grease on the drive disc (A, Figure 25) causing slippage.

2.Broken or disconnected drive spring (B).

3.Driven disc (C) is out of adjustment.

4.Driven disc rubber is worn - does not contact drive disc properly.

5.Worn Poly-V belt (D) or engine drive belt (E).

If any of the above (1 thru 5) are causing problems, service as follows:

Cleaning Drive Disc & Driven Disc

If oil or grease on the drive disc or driven disc is causing slippage, clean the discs as follows:

1.Wipe away any oil or grease with a clean cloth.

2.Use either an approved grease solvent or hot, soapy water to clean drive disc or driven disc.

3.Rinse components with clean water.

4.Dry components with a clean cloth.

Drive Spring Repair/Replacement

If the drive spring (A, Figure 26) is loose, reconnect. If the spring is broken, replace with a new spring.

Note: Use a pair of needle nose pliers to install the drive spring.

IMPORTANT: If the drive system continues slipping, refer to the Troubleshooting section.

A

Figure 26: Replacing the drive spring

Driven Disc Adjustment

If the drive disc and driven disc are clean and the mower drive is still slipping, adjust the driven disc as follows:

1.Move the ground speed control (A, Figure 27) into the ‘fast’ position.

C

Figure 27: The ground speed control

14

www.snapper.com

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Steel Deck Walk Mowers Series Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Protection for Children Slope OperationPreparation From Previous Column PreparationMaintenance and Storage Safe Handling of Gasoline From PreviousOperation Operation From Previous ColumnFeatures and Controls Features and ControlsStarting and Operation Operation Pre-Start Check ListEngine and Blade Briggs Engines Handle Height Adjustment OperationStopping Engine and Blade Kawasaki EngineRecycling Operation Cutting Height AdjustmentRemoving the Recycling Cover Installing the Discharge Deflector Installing the Grass Bag AdapterInstalling the Recycling Plug Installing the Grass BagMaintenance Maintenance Introduction Service After First 5 HoursCheck Grease Level in Transmission Change Engine OilService Periodic MaintenanceStorage Procedure Mower Blade Replacement Standard Blade Wear LimitNinja Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Self-Propelled Models Only Driven and Drive Disc Service Cleaning Drive Disc & Driven DiscDrive Spring Repair/Replacement Driven Disc AdjustmentDriven Disc Replacement Adjusting the driven discDriven Disc Bearing Replacement Removing the driven disc assemblyEngine Drive Belt Replacement Stretch Type Belts Belt ServiceReplacing the Bearing On the Pulley End Of the Hex Shaft Transmission Poly-V Belt Replacement ProcedureMaintenance Battery Service New Battery PreparationBattery Service Battery StorageService Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Page Page Page Product Specifications Common Service Parts

2167519B specifications

Snapper 2167519B represents a sophisticated approach to outdoor power equipment, designed to meet the needs of both casual users and professional landscapers. This high-performance walk-behind mower is engineered for efficiency, durability, and convenience, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Snapper 2167519B is its robust 190cc engine. This powerful engine provides ample torque and performance, enabling the mower to easily tackle a variety of grass types and terrains. The engine is designed for easy starting and reliable operation, ensuring that users can get to work without the frustrations often associated with small engines.

The Snapper 2167519B is equipped with a 21-inch cutting deck, which strikes a balance between maneuverability and cutting capacity. This size is ideal for residential lawns and smaller commercial properties, making it versatile for different mowing needs. The deck is constructed from high-quality materials to withstand the rigors of frequent use, and it features a design that promotes efficient grass clipping discharge, whether mulching, bagging, or side discharging.

Another key characteristic of the Snapper 2167519B is its height adjustment feature, which allows users to easily modify cutting heights between 1 to 4 inches. This feature accommodates various grass types and user preferences, ensuring a clean and even cut every time.

User comfort is also a priority for the Snapper 2167519B. The mower features ergonomic handlebars designed to reduce fatigue during extended operation. Additionally, the self-propelled option enhances ease of use, allowing users to navigate hilly terrains or dense grass with minimal effort.

In terms of technology, the Snapper 2167519B includes a rear-wheel drive system, which provides excellent traction and stability on uneven surfaces. The design also features larger rear wheels that enhance maneuverability and ease of turning.

In summary, the Snapper 2167519B is a compelling choice for anyone in need of a dependable and efficient walk-behind mower. With its powerful engine, versatile cutting capabilities, and user-friendly features, this mower is well-suited for a variety of lawn care tasks, delivering quality performance season after season. Whether for residential use or light commercial applications, the Snapper 2167519B stands out as a reliable and effective tool for maintaining any lawn.
Top Page Image Contents