Snapper Guide to Mower Height Adjustment and Drive Disc Adjustment
Page 8

Operation (Continued)

Starting and Operation (Continued)

Engine and Blade (Kawasaki Engine)

1.Make sure the fuel valve (A, Figure 5) on the engine is open.

Stopping

1.Stop forward motion of the mower by releasing the wheel drive control.

2.Stop the engine and blade by releasing the blade control.

A

Handle Height Adjustment

The height of the mower handle can be adjusted as follows:

1.Loosen the lower nuts (A, Figure 7) on each lower handle.

Operation

Figure 5: Fuel shut-off (Kawasaki engine only)

2.Move the engine speed control past the fast (‘Rabbit’) detent to the ‘Choke’ position.

3.Pull the blade control (A, Figure 4) against the handle.

4.Pull the rope start handle (B) to crank the engine.

5.After the engine starts, allow a brief warm-up until the engine runs smooth before beginning mower operation.

NOTE: To stop the engine (and blade), release the blade control.

Propelling the Mower

1.Start the engine. Refer to the Section entitled “Starting and Operation – Engine and Blade”.

2.Move the ground speed control (A, Figure 6) to the desired speed position.

3.Squeeze the wheel drive control (B) against the handle to engage the wheel drive and propel the mower forward. Forward speed can be adjusted while the mower is moving by changing the position of the ground speed control.

A

B

B

A

Figure 7: Adjusting the handle height

2.Move the handle assembly (B) up or down until the desired position is achieved.

3.Tighten the lower nuts on each lower handle to maintain the desired position.

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

Figure 6: Mower drive controls

6

www.snapper.com

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Steel Deck Walk Mowers Series Date of Purchase Retailer Retailers Phone Number Equipment EngineTable of Contents Protection for Children Slope OperationPreparation From Previous Column PreparationMaintenance and Storage Safe Handling of Gasoline From PreviousOperation Operation From Previous ColumnFeatures and Controls Features and ControlsEngine and Blade Briggs Engines Operation Pre-Start Check ListStarting and Operation Handle Height Adjustment OperationStopping Engine and Blade Kawasaki EngineRemoving the Recycling Cover Cutting Height AdjustmentRecycling Operation Installing the Discharge Deflector Installing the Grass Bag AdapterInstalling the Recycling Plug Installing the Grass BagMaintenance Maintenance Introduction Service After First 5 HoursCheck Grease Level in Transmission Change Engine OilStorage Procedure MaintenanceService Periodic Mower Blade Replacement Standard Blade Wear LimitNinja Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Self-Propelled Models Only Driven and Drive Disc Service Cleaning Drive Disc & Driven DiscDrive Spring Repair/Replacement Driven Disc AdjustmentDriven Disc Replacement Adjusting the driven discDriven Disc Bearing Replacement Removing the driven disc assemblyReplacing the Bearing On the Pulley End Of the Hex Shaft Belt ServiceEngine Drive Belt Replacement Stretch Type Belts Transmission Poly-V Belt Replacement ProcedureMaintenance Battery Service New Battery PreparationBattery Service Battery StorageService Schedule Maintenance/Replacement PartsTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Page Page Page Product Specifications Common Service Parts

2167519B specifications

Snapper 2167519B represents a sophisticated approach to outdoor power equipment, designed to meet the needs of both casual users and professional landscapers. This high-performance walk-behind mower is engineered for efficiency, durability, and convenience, making it a popular choice among lawn care enthusiasts.

One of the standout features of the Snapper 2167519B is its robust 190cc engine. This powerful engine provides ample torque and performance, enabling the mower to easily tackle a variety of grass types and terrains. The engine is designed for easy starting and reliable operation, ensuring that users can get to work without the frustrations often associated with small engines.

The Snapper 2167519B is equipped with a 21-inch cutting deck, which strikes a balance between maneuverability and cutting capacity. This size is ideal for residential lawns and smaller commercial properties, making it versatile for different mowing needs. The deck is constructed from high-quality materials to withstand the rigors of frequent use, and it features a design that promotes efficient grass clipping discharge, whether mulching, bagging, or side discharging.

Another key characteristic of the Snapper 2167519B is its height adjustment feature, which allows users to easily modify cutting heights between 1 to 4 inches. This feature accommodates various grass types and user preferences, ensuring a clean and even cut every time.

User comfort is also a priority for the Snapper 2167519B. The mower features ergonomic handlebars designed to reduce fatigue during extended operation. Additionally, the self-propelled option enhances ease of use, allowing users to navigate hilly terrains or dense grass with minimal effort.

In terms of technology, the Snapper 2167519B includes a rear-wheel drive system, which provides excellent traction and stability on uneven surfaces. The design also features larger rear wheels that enhance maneuverability and ease of turning.

In summary, the Snapper 2167519B is a compelling choice for anyone in need of a dependable and efficient walk-behind mower. With its powerful engine, versatile cutting capabilities, and user-friendly features, this mower is well-suited for a variety of lawn care tasks, delivering quality performance season after season. Whether for residential use or light commercial applications, the Snapper 2167519B stands out as a reliable and effective tool for maintaining any lawn.
Top Page Image Contents