Snapper EFRP216516BV Repair & Adjustments, Blade Sharpening, 1A. Ninja Blade Wear Limit

Page 11

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.1 MOWER BLADE REPLACEMENT 4.1.1. STANDARD BLADE WEAR LIMIT

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.1.

NEW BLADE

WEAR LIMIT (NOTCH STARTS)

DANGEROUS

CONDITION !

DO NOT USE ON

MOWER !

REPLACE WITH NEW

BLADE.

2.Replace the blade if it is badly chipped, bent, noticeably out of balance or has cracks or notch in either tip. See Figure 4.1 & 4.2. Replace with new blade.

WARNING

DO NOT use a cutting blade that shows signs of excessive wear or damage. Refer to Section “MOWER BLADE REPLACEMENT” for proper blade inspection and service procedures.

4.1.2. BLADE SHARPENING

1.Disconnect spark plug wire and secure end away from plug.

IMPORTANT: DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

2.Tilt mower up on its rear wheels. Do not tilt mower with spark plug or carburetor down.

3.Remove blade. See Figure 4.3.

MAKE SURE THAT

BLADE HUB IS

SEATED

BLADE BETWEEN

HUBFLANGES

FIGURE 4.1

4.1.1A. NINJA BLADE WEAR LIMIT

1A. Inspect blade frequently for signs of excessive wear or damage. See Figure 4.2.

NEW BLADE

WEAR LIMIT.

CRACKS OR

 

 

NOTCHES

 

BEGIN TO

 

APPEAR ON TIP

FLANGE

BLADE

CONE WASHER (Concave Side Up)

CAPSCREW

FIGURE 4.3

DANGEROUS !

DO NOT USE A BLADE IN

THIS CONDITION !

FIGURE 4.2

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents European 21 Steel Deck Walk Mowers Series Preparation Protection for ChildrenSlope Operation Operation Maintenance and StorageTable of Contents Nomenclature FamiliarizationIntroduction Starting & Operation 2.2.1. Engine & Blade Operating InstructionsPRE-START Check List Self Propelled Models Only Cutting Height AdjustmentHandle Height Adjustment Propelling MowerModels with an F prefix in model number Adjusting Front Deck BaffleInstallation of Grass Catcher Recycling OperationService After First 5 Hours 3.2.1. Change Engine OIL MaintenanceCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower Blade1A. Ninja Blade Wear Limit Repair & AdjustmentsMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Drive Spring Repair/Replacement Driven Disc ServiceDriven Disc Adjustment Cleaning Drive Disc & Driven DiscReplacing Driven Disc Rubber Ring Drive Disc Assembly Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Problem Probable Cause Corrective Action TroubleshootingUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts Decal Identification European Performance Disclaimer of Warranty Year Limited WarrantyPage European Steel Deck Walk Mowers Series

EFRP216516BV specifications

The Snapper EFRP216516BV is a powerful, versatile lawn mower designed for both residential and professional use. It combines state-of-the-art engineering with user-friendly features, making it an excellent choice for those seeking efficiency and ease of use in lawn maintenance.

One of the standout features of the EFRP216516BV is its 21-inch mowing deck, which provides a perfect balance between maneuverability and coverage. This size is ideal for navigating through tight spaces while still allowing for efficient grass cutting on larger lawns. The durable steel construction ensures longevity and reliability, so users can depend on this mower for years to come.

The EFRP216516BV comes equipped with a robust 163cc OHV engine, delivering reliable power to handle tough mowing tasks. The engine's overhead valve design promotes fuel efficiency and reduces emissions, making it a more environmentally friendly choice in the lawn care segment. Additionally, the mower features adjustable cutting heights, allowing users to customize their mowing experience based on grass length and conditions.

Technologically, the Snapper EFRP216516BV incorporates a Ready Start system, which eliminates the need for priming and choking. This convenience allows users to start the mower effortlessly with just a pull of the handle. The self-propelled feature further enhances ease of use; the variable speed control allows operators to adjust their pace according to their preference and the terrain, ensuring a comfortable mowing experience.

Another notable characteristic is the mower's mulching capability. With this feature, grass clippings can be finely chopped and returned to the lawn, providing natural nutrients to the soil and cutting down on yard waste. The EFRP216516BV also includes a rear bagging option for those who prefer to collect clippings, making it highly adaptable to different lawn care needs.

The ergonomic design of the handle provides comfort during extended use, and the foldable feature allows for easy storage in smaller spaces. Overall, the Snapper EFRP216516BV stands out as a reliable, powerful, and feature-rich lawn mower that meets the demands of homeowners and landscape professionals alike.
Top Page Image Contents