Snapper EFRP216516BV important safety instructions Replacing Driven Disc Rubber Ring

Page 14

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.3.DRIVEN DISC ADJUSTMENT (Continued From Previous Page)

2.Remove driven disc spring from driven disc assembly. Loosen connector hex nut. See Figure 4.9.

1/8” MEASUREMENT TO OUTSIDE EDGE OF DRIVE DISC

DRIVE

SLIDE DRIVENDISC DISC ASSEMBLY

TOWARD OUTSIDE EDGE

TRANSFER

ROD

CONNECTOR

DRIVEN DISC

ASSEMBLY

DRIVE

DISC

HEX NUT

CONNECTOR

OUTSIDE EDGE

DRIVEN DISC

SPRING

TRANSFER

ROD

CONNECTOR

CONNECTOR

HEX NUT

FIGURE 4.9

3.Slide driven disc assembly over to 1/8” from outside edge of drive disc. Maintaining the 1/8” measurement, remove any looseness from the linkage. This can be done by holding the transfer rod and applying pressure to the left (as viewed from operators position). Then retighten the connector hex nut securely. See Figure

4.10.Move ground speed control to the first speed position, then back to the sixth speed position. Recheck the 1/8” measurement described previously. Reinstall driven disc spring to driven disc assembly.

FIGURE 4.10

4.3.4. Replacing Driven Disc Rubber Ring

If the rubber ring is badly chunked or worn down to within 1/16” of the metal rim of the driven disc hub, it must be replaced. Install new rubber ring as follows:

1.Using a small flat blade screwdriver, free the clip from the transfer rod. Then remove the transfer rod from the clip and the speed control rod. See Figure

CONNECTOR

CLIP

TRANSFER

ROD

SPEED CONTROL

ROD

FIGURE 4.11

(Continued On Next Page)

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents European 21 Steel Deck Walk Mowers Series Preparation Protection for ChildrenSlope Operation Maintenance and Storage OperationTable of Contents Nomenclature FamiliarizationIntroduction Starting & Operation 2.2.1. Engine & Blade Operating InstructionsPRE-START Check List Propelling Mower Cutting Height AdjustmentHandle Height Adjustment Self Propelled Models OnlyRecycling Operation Adjusting Front Deck BaffleInstallation of Grass Catcher Models with an F prefix in model numberMaintenance Service After First 5 Hours 3.2.1. Change Engine OILCheck Mower Blade Service AnnuallyStorage Procedure Check Engine Drive BeltBlade Sharpening Repair & AdjustmentsMower Blade Replacement 4.1.1. Standard Blade Wear Limit 1A. Ninja Blade Wear LimitWheel Drive Control Adjustment Cleaning Drive Disc & Driven Disc Driven Disc ServiceDriven Disc Adjustment Drive Spring Repair/ReplacementReplacing Driven Disc Rubber Ring Drive Disc Assembly Belt Service Engine Drive Belt Replacement Stretch Type BeltsPulley Position Troubleshooting Problem Probable Cause Corrective ActionUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts Decal Identification European Performance Year Limited Warranty Disclaimer of WarrantyPage European Steel Deck Walk Mowers Series

EFRP216516BV specifications

The Snapper EFRP216516BV is a powerful, versatile lawn mower designed for both residential and professional use. It combines state-of-the-art engineering with user-friendly features, making it an excellent choice for those seeking efficiency and ease of use in lawn maintenance.

One of the standout features of the EFRP216516BV is its 21-inch mowing deck, which provides a perfect balance between maneuverability and coverage. This size is ideal for navigating through tight spaces while still allowing for efficient grass cutting on larger lawns. The durable steel construction ensures longevity and reliability, so users can depend on this mower for years to come.

The EFRP216516BV comes equipped with a robust 163cc OHV engine, delivering reliable power to handle tough mowing tasks. The engine's overhead valve design promotes fuel efficiency and reduces emissions, making it a more environmentally friendly choice in the lawn care segment. Additionally, the mower features adjustable cutting heights, allowing users to customize their mowing experience based on grass length and conditions.

Technologically, the Snapper EFRP216516BV incorporates a Ready Start system, which eliminates the need for priming and choking. This convenience allows users to start the mower effortlessly with just a pull of the handle. The self-propelled feature further enhances ease of use; the variable speed control allows operators to adjust their pace according to their preference and the terrain, ensuring a comfortable mowing experience.

Another notable characteristic is the mower's mulching capability. With this feature, grass clippings can be finely chopped and returned to the lawn, providing natural nutrients to the soil and cutting down on yard waste. The EFRP216516BV also includes a rear bagging option for those who prefer to collect clippings, making it highly adaptable to different lawn care needs.

The ergonomic design of the handle provides comfort during extended use, and the foldable feature allows for easy storage in smaller spaces. Overall, the Snapper EFRP216516BV stands out as a reliable, powerful, and feature-rich lawn mower that meets the demands of homeowners and landscape professionals alike.
Top Page Image Contents