Snapper EFRP216516BV Driven Disc Service, Driven Disc Adjustment, Drive Spring Repair/Replacement

Page 13

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3 DRIVEN DISC SERVICE

If the mower does not propel itself properly, See Figure 4.6. Check for the following problems:

USE NEEDLE NOSE PLIERS TO INSTALL DRIVE SPRING

DRIVEN DISC & RUBBER RING

DRIVE

SPRING

ENGINE

DRIVE

BELT

DRIVE

DISC

POLY-V BELT

DRIVE

SPRING

FIGURE 4.7

4.3.3. DRIVEN DISC ADJUSTMENT

If the drive disc and driven disc are clean and the mower drive is still slipping, adjust the driven disc as follows:

FIGURE 4.6

1.Grease on drive disc causing slippage.

2.Broken or disconnected drive spring.

3.Driven disc is out of adjustment.

4.Driven disc rubber ring is worn - does not contact drive disc properly.

5.Worn Poly-V Belt or engine drive belt.

NOTE: If any of the above (1 thru 5) are causing problems, service as follows:

4.3.1. Cleaning Drive Disc & Driven Disc.

If oil or grease on the drive disc or driven disc is causing slippage, clean discs as follows:

1.Wipe away any oil or grease with a clean cloth.

2.Use either an approved grease solvent or hot, soapy water to clean drive disc or driven disc.

3.Rinse components with clean water.

4.Dry components with a clean cloth.

4.3.2. Drive Spring Repair/Replacement

If drive spring is loose, reconnect as shown in Figure 4.7. If spring is broken, replace with new spring.

IMPORTANT: If machine drive system continues slipping see Trouble Shooting section.

1.Place shift rod in the number six speed position. See Figure 4.8.

MOVE GROUND

REYCLING MODEL SHOWN

SPEED CONTROL TO

(ROPE START MOUNTED ON

SIX SPEED POSITION

RIGHT SIDE OF HANDLE)

 

SIXTH SPEED

POSITION

SIXTH

FIRST

FIRST SPEED

POSITION

 

FIGURE 4.8

(Continued On Next Page)

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents European 21 Steel Deck Walk Mowers Series Slope Operation Protection for ChildrenPreparation Operation Maintenance and StorageTable of Contents Introduction FamiliarizationNomenclature PRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Handle Height Adjustment Cutting Height AdjustmentPropelling Mower Self Propelled Models OnlyInstallation of Grass Catcher Adjusting Front Deck BaffleRecycling Operation Models with an F prefix in model numberService After First 5 Hours 3.2.1. Change Engine OIL MaintenanceStorage Procedure Service AnnuallyCheck Mower Blade Check Engine Drive BeltMower Blade Replacement 4.1.1. Standard Blade Wear Limit Repair & AdjustmentsBlade Sharpening 1A. Ninja Blade Wear LimitWheel Drive Control Adjustment Driven Disc Adjustment Driven Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Driven Disc Rubber Ring Drive Disc Assembly Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Problem Probable Cause Corrective Action TroubleshootingMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Decal Identification European Performance Disclaimer of Warranty Year Limited WarrantyPage European Steel Deck Walk Mowers Series

EFRP216516BV specifications

The Snapper EFRP216516BV is a powerful, versatile lawn mower designed for both residential and professional use. It combines state-of-the-art engineering with user-friendly features, making it an excellent choice for those seeking efficiency and ease of use in lawn maintenance.

One of the standout features of the EFRP216516BV is its 21-inch mowing deck, which provides a perfect balance between maneuverability and coverage. This size is ideal for navigating through tight spaces while still allowing for efficient grass cutting on larger lawns. The durable steel construction ensures longevity and reliability, so users can depend on this mower for years to come.

The EFRP216516BV comes equipped with a robust 163cc OHV engine, delivering reliable power to handle tough mowing tasks. The engine's overhead valve design promotes fuel efficiency and reduces emissions, making it a more environmentally friendly choice in the lawn care segment. Additionally, the mower features adjustable cutting heights, allowing users to customize their mowing experience based on grass length and conditions.

Technologically, the Snapper EFRP216516BV incorporates a Ready Start system, which eliminates the need for priming and choking. This convenience allows users to start the mower effortlessly with just a pull of the handle. The self-propelled feature further enhances ease of use; the variable speed control allows operators to adjust their pace according to their preference and the terrain, ensuring a comfortable mowing experience.

Another notable characteristic is the mower's mulching capability. With this feature, grass clippings can be finely chopped and returned to the lawn, providing natural nutrients to the soil and cutting down on yard waste. The EFRP216516BV also includes a rear bagging option for those who prefer to collect clippings, making it highly adaptable to different lawn care needs.

The ergonomic design of the handle provides comfort during extended use, and the foldable feature allows for easy storage in smaller spaces. Overall, the Snapper EFRP216516BV stands out as a reliable, powerful, and feature-rich lawn mower that meets the demands of homeowners and landscape professionals alike.
Top Page Image Contents