Snapper EFRP216516BV Belt Service, Engine Drive Belt Replacement Stretch Type Belts

Page 16

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.6.Replacement Of Bearing On Pulley End Of Hex Shaft

To replace the bearing on the pulley end of the hex shaft, proceed as follows:

1.Hold the hex shaft with an adjustable wrench held next to the pulley.

2.Remove the 3/8” hex lock nut which is located on the outside of the right wheel bracket. See Figure

3.Remove holder, O-ring and bearing.

4.Install new bearing.

5.Carefully install new O-ring over the outside of the new bearing.

6.Install bearing holder and secure with screws.

7.Install 3/8” hex lock nut.

BALL BEARING

“O” RING

3/8”

LOCK NUT

BALL BEARING

HOLDER

FIGURE 4.15

4.4BELT SERVICE

On self-propelled mowers, the engine belt transmits power from engine to drive disc. The drive disc powers the poly-v belt which engages the transmission that powers the rear wheels. Should these belts become worn, they could cause slippage which would impair mower performance. The condition of the engine belt and poly-v belt should be checked after every 25 hours of mower operation.

4.4.1. Engine Drive Belt Replacement (Stretch Type Belts)

1.Empty the fuel tank.

2.Note the belt routing in Figure 4.16. There is no idler pulley on these models to disconnect. See Figure

DRIVE BELT

ENGINE DRIVE PULLEY

DRIVE DISC

TOP VIEW OF STRETCH TYPE BELT ROUTING

FIGURE 4.16

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents European 21 Steel Deck Walk Mowers Series Slope Operation Protection for ChildrenPreparation Maintenance and Storage OperationTable of Contents Introduction FamiliarizationNomenclature PRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Cutting Height Adjustment Handle Height AdjustmentPropelling Mower Self Propelled Models OnlyAdjusting Front Deck Baffle Installation of Grass CatcherRecycling Operation Models with an F prefix in model numberMaintenance Service After First 5 Hours 3.2.1. Change Engine OILService Annually Storage ProcedureCheck Mower Blade Check Engine Drive BeltRepair & Adjustments Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening 1A. Ninja Blade Wear LimitWheel Drive Control Adjustment Driven Disc Service Driven Disc AdjustmentCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Driven Disc Rubber Ring Drive Disc Assembly Belt Service Engine Drive Belt Replacement Stretch Type BeltsPulley Position Troubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachUSE HRS Season Decal Identification European Performance Year Limited Warranty Disclaimer of WarrantyPage European Steel Deck Walk Mowers Series

EFRP216516BV specifications

The Snapper EFRP216516BV is a powerful, versatile lawn mower designed for both residential and professional use. It combines state-of-the-art engineering with user-friendly features, making it an excellent choice for those seeking efficiency and ease of use in lawn maintenance.

One of the standout features of the EFRP216516BV is its 21-inch mowing deck, which provides a perfect balance between maneuverability and coverage. This size is ideal for navigating through tight spaces while still allowing for efficient grass cutting on larger lawns. The durable steel construction ensures longevity and reliability, so users can depend on this mower for years to come.

The EFRP216516BV comes equipped with a robust 163cc OHV engine, delivering reliable power to handle tough mowing tasks. The engine's overhead valve design promotes fuel efficiency and reduces emissions, making it a more environmentally friendly choice in the lawn care segment. Additionally, the mower features adjustable cutting heights, allowing users to customize their mowing experience based on grass length and conditions.

Technologically, the Snapper EFRP216516BV incorporates a Ready Start system, which eliminates the need for priming and choking. This convenience allows users to start the mower effortlessly with just a pull of the handle. The self-propelled feature further enhances ease of use; the variable speed control allows operators to adjust their pace according to their preference and the terrain, ensuring a comfortable mowing experience.

Another notable characteristic is the mower's mulching capability. With this feature, grass clippings can be finely chopped and returned to the lawn, providing natural nutrients to the soil and cutting down on yard waste. The EFRP216516BV also includes a rear bagging option for those who prefer to collect clippings, making it highly adaptable to different lawn care needs.

The ergonomic design of the handle provides comfort during extended use, and the foldable feature allows for easy storage in smaller spaces. Overall, the Snapper EFRP216516BV stands out as a reliable, powerful, and feature-rich lawn mower that meets the demands of homeowners and landscape professionals alike.
Top Page Image Contents