Snapper EFRP216516BV important safety instructions Drive Disc Assembly

Page 15

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.4.Replacing Driven Disc Rubber Ring (Continued From Previous Page)

2.Using needle nose pliers, unhook the drive spring and slide the driven disc assembly off the hex shaft. See Figure 4.12.

3.Remove the five machine screws and plate which secure the rubber ring to the driven disc hub. See Figure 4.13.

4.Install new rubber ring.

5.Reverse above procedures for reassembly and installation.

DRIVE DISC

ASSEMBLY

4.3.5.Replacing Bearing In Driven Disc Assembly If the driven disc bearing fails, remove the driven disc assembly and replace bearing as follows:

1. Using a small flat blade screwdriver, free the clip from the transfer rod. Then remove the transfer rod from the clip and the speed control rod. See Figure 4.11.

2. Using needle nose pliers, unhook the drive spring and slide the driven disc assembly off the hex shaft. See Figure 4.12.

3. Remove snap ring that secures driven disc hub to thrust plate. See Figure 4.14.

THRUST

SHIM

PLATE

WASHER

 

SNAP

 

RING

BEARING

 

REMOVE FOUR

 

MACHINE SCREWS

 

 

DRIVEN

 

DISC HUB

DRIVEN DISC

RUBBER

DISC

PLATE

 

 

 

FIGURE 4.14

4.Slide the hub assembly out of the bearing.

5.Remove the four screws.

6.Remove bearing and replace with new bearing.

7.Reassemble components in reverse order.

FIGURE 4.12

DRIVEN DISC HUB

MACHINE

SCREWS

RUBBER

RING

PLATE

FIGURE 4.13

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents European 21 Steel Deck Walk Mowers Series Protection for Children Slope OperationPreparation Operation Maintenance and StorageTable of Contents Familiarization IntroductionNomenclature Operating Instructions PRE-START Check ListStarting & Operation 2.2.1. Engine & Blade Self Propelled Models Only Cutting Height AdjustmentHandle Height Adjustment Propelling MowerModels with an F prefix in model number Adjusting Front Deck BaffleInstallation of Grass Catcher Recycling OperationService After First 5 Hours 3.2.1. Change Engine OIL MaintenanceCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower Blade1A. Ninja Blade Wear Limit Repair & AdjustmentsMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Drive Spring Repair/Replacement Driven Disc ServiceDriven Disc Adjustment Cleaning Drive Disc & Driven DiscReplacing Driven Disc Rubber Ring Drive Disc Assembly Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Problem Probable Cause Corrective Action TroubleshootingService Performed Each MAINTENANCE/REPLACEMENT PartsUSE HRS Season Decal Identification European Performance Disclaimer of Warranty Year Limited WarrantyPage European Steel Deck Walk Mowers Series

EFRP216516BV specifications

The Snapper EFRP216516BV is a powerful, versatile lawn mower designed for both residential and professional use. It combines state-of-the-art engineering with user-friendly features, making it an excellent choice for those seeking efficiency and ease of use in lawn maintenance.

One of the standout features of the EFRP216516BV is its 21-inch mowing deck, which provides a perfect balance between maneuverability and coverage. This size is ideal for navigating through tight spaces while still allowing for efficient grass cutting on larger lawns. The durable steel construction ensures longevity and reliability, so users can depend on this mower for years to come.

The EFRP216516BV comes equipped with a robust 163cc OHV engine, delivering reliable power to handle tough mowing tasks. The engine's overhead valve design promotes fuel efficiency and reduces emissions, making it a more environmentally friendly choice in the lawn care segment. Additionally, the mower features adjustable cutting heights, allowing users to customize their mowing experience based on grass length and conditions.

Technologically, the Snapper EFRP216516BV incorporates a Ready Start system, which eliminates the need for priming and choking. This convenience allows users to start the mower effortlessly with just a pull of the handle. The self-propelled feature further enhances ease of use; the variable speed control allows operators to adjust their pace according to their preference and the terrain, ensuring a comfortable mowing experience.

Another notable characteristic is the mower's mulching capability. With this feature, grass clippings can be finely chopped and returned to the lawn, providing natural nutrients to the soil and cutting down on yard waste. The EFRP216516BV also includes a rear bagging option for those who prefer to collect clippings, making it highly adaptable to different lawn care needs.

The ergonomic design of the handle provides comfort during extended use, and the foldable feature allows for easy storage in smaller spaces. Overall, the Snapper EFRP216516BV stands out as a reliable, powerful, and feature-rich lawn mower that meets the demands of homeowners and landscape professionals alike.
Top Page Image Contents