Snapper SGT27540D manual Parking Brake Function, Automatic Controlled Traction

Page 14

Features & Controls

Transmission Oil Level Check Plug

Transmission oil check plug/dipstick is used to check transmission oil level and to add oil to the transmission. See TRANSMISSION MAINTENANCE for oil level check and fill procedures.

Mid / Rear PTO Selector

The mid / rear PTO selector lever selects which PTO or combination of PTOs is activated by the PTO switch. The selector has three positions (from front to back:) mid PTO active only, mid and rear PTO active, rear PTO active only. Disengage the PTO switch before altering this control’s setting.

Front / Rear Hydraulics Selector

The front / rear hydraulics selector switches which hydraulic circuit is controlled by the forward and back- ward movement of the attachment lift lever.

When the switch is in the forward position, the attach- ment lift control lever affects attachments connected to the two front left quick couplers. When the switch is in the rear position the attachment lift control affects the tractor’s hydraulic cylinder.

12V Power Outlet (Select Models)

The power outlet is 12V-DC. Accessory must be rated at 14 amps or less.

Differential Lock Pedal

Depressing this pedal locks the transmission differential, locking both rear wheels into “drive”.

Use this feature if the tractor is stuck because one wheel is slipping. Engage the differential lock at slow ground speeds only.

PTO Switch

The PTO (Power Take-Off) switch, in conjunction with the mid / rear PTO selector, engages and disengages attachments connected to the tractor’s mid or rear PTO shafts. To engage the PTO, pull UP on the switch. Push DOWN to disengage. Be sure to check the position of the mid / rear PTO selector lever before engaging the PTO. DO NOT engage a PTO that is not connected to an attachment as the rotating shaft is a safety hazard. Note that the operator must be seated firmly in the trac- tor seat for the PTO to function.

Reverse Mowing Option (RMO)

The Reverse Mowing Option allows for mowing (or use of other PTO driven attachments) while traveling in reverse. If you choose to mow or operate another attachment in reverse, turn the RMO key after the PTO is engaged. The L.E.D. light will illuminate, and the opera- tor can then mow in reverse. Each time the PTO is dis- engaged the RMO needs to be reactivated if desired.

Parking Brake Function

Applying the Parking Brake - See Figure 2. To lock the parking brake, release the ground speed pedals (A), fully depress the brake pedal (B), pull the parking brake knob (C) out, and then release brake pedal.

Releasing the Parking Brake - See Figure 2. To release the parking brake, fully depress the brake pedal

(B) and push in the parking brake knob (C).

Automatic Controlled Traction

What is Automatic Controlled Traction?

C

B

A

Automatic Controlled Traction (ACT) is an exclusive fea- ture of our transmissions that provides improved traction. ACT applies a preset amount of torque to both rear wheels even if one starts slipping (a transmission without ACT will lose traction completely if one rear wheel starts slipping). This preset torque is just enough to provide additional traction, and still allow the wheels to turn at dif- ferent speeds in a tight turn without damaging the lawn.

What to Expect from Your ACT Tractor

For the most part, while using your tractor you will not notice ACT working, and you will simply become accus- tomed to increased traction an ACT transmission pro- vides.

Under certain circumstances the ACT system limit can

Figure 2. Engaging the Parking Brake

A. Ground Speed Pedals

B. Brake Pedal

C. Parking Brake Knob

be exceeded, and one of the rear wheels may slip (for instance if trying to turn up a hill while accelerating). This is normal. If you start to lose traction, do not speed up. Instead, slow to a stop, straighten the steering wheel, and slowly accelerate. Stopping the tractor allows the transmission to regain more traction.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Mfg. No. Description 27HP Hydro Tractors & Mower DecksMower Decks Page Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service & Maintenance Safe Handling of GasolineTractor ID Tag Mower ID Tag Identification NumbersCE Identification Tag Markings Decal PTO Selector Positions Safety DecalsSafety Decals Decal Danger, Rotating Fan CE, Diesel ModelsSafety Icons Operational Safety ChecksControl Functions Features & Controls Parking Brake Function Automatic Controlled TractionDashboard Display Functions Adding Fuel General Operating SafetySlope Operation Stopping The Tractor & EngineOperating the Tractor Hydraulic System Functions Using Inboard HydraulicsPushing The Tractor By Hand GeneralUsing Auxiliary Hydraulics Auxiliary Hydraulics Angle Left Angle RightLocking The Hitch Attachment Weight LimitOptional 3-Point Hitch Operation Select Models Hitch Arms Installation Checks Before Starting Connecting a Drive ShaftRear PTO Operation Select Models Starting & Stopping the PTOAttachment Recommendations Mower Deck Removal & Installation Removing the Mower DeckInstalling the Mower Deck Mower Electrical ConnectionStorage Volt Power OutletAttaching a Trailer Regular Maintenance Before Every Spring Each Hours Fall UseClean Transmission Oil Cooler Regular MaintenanceClean Radiator Check Engine Coolant LevelService Interval Seasonally or as Needed Drain Fuel SeparatorService Interval Every 25 Hours Check Transmission Oil LevelOil Filter Part No Change Transmission Oil & filterCheck Front Axle Oil Level Service Interval Every 100 Hours or Fall & Spring Safety Interlock System CheckService Interval Every Fall & Spring Check Mower Deck Gear Box OilCheck Tire Pressures Battery MaintenanceCleaning the Battery and Cables Size TreadOil LubricationGrease Fitting Yearly Grease the ElectricLift Rod Grease Arm Grease Fitting YearlyServicing The Mower Blades Removing the BladeMaintenance Records Troubleshooting Adjustment, & Service Troubleshooting the Mower Brake Adjustment Troubleshooting, Adjustment, & ServiceSeat Adjustment Seat Slide AdjustmentBattery Charging Headlight ReplacementTaillight & Dash Light Replacement Mower Adjustments Gauge Wheel AdjustmentSide-to-Side Adjustment Lock Nut, 5/16-18 Spacer Bolt Leveling The MowerTo avoid damaging belts, do not PRY Mower Belt ReplacementMower Drive Belt Replacement Specifications 27 HP* Briggs & StrattonOptional Accessories Replacement PartsMaintenance Items Technical Manuals

SGT27540D specifications

The Snapper SGT27540D is a robust and versatile lawn mower designed to cater to both residential and light commercial users. This model, known for its efficiency and ease of use, combines advanced technology with practical features, making yard maintenance a seamless task.

One of the standout features of the SGT27540D is its powerful 27 horsepower engine, which provides ample power for tackling various types of terrain and grass conditions. The engine’s design incorporates advanced cooling and lubrication systems, ensuring longevity and reduced maintenance needs. This lawn mower also features a self-propelled drive system, which allows users to effortlessly navigate through their yards without straining themselves.

The Snapper SGT27540D is equipped with a 54-inch cutting deck, facilitating a wide cutting swath that can efficiently cover large expanses of grass in a short amount of time. This deck features a robust steel construction for durability, and the adjustable cutting height offers versatility, allowing users to choose the perfect blade height based on their lawn’s requirements.

One of the defining technologies in the SGT27540D is the signature Snapper HiVac mowing system. This technology optimizes grass lifting, ensuring that even the toughest mowing jobs result in a clean and precise cut. As an added bonus, the HiVac system also improves grass clipping collection, making post-mowing cleanup a breeze.

Another notable characteristic of the Snapper SGT27540D is its user-friendly controls. The ergonomically designed steering lever allows for intuitive operation, while the dashboard provides essential information about speed and engine performance. For added comfort, the mower features an adjustable seat that can accommodate users of different heights.

The safety of operators is also a priority in the design of the SGT27540D. It is equipped with a reliable blade brake system that halts the blades quickly when necessary, minimizing the risk of accidents.

In summary, the Snapper SGT27540D is an exemplary lawn mower that marries durable construction with advanced technology. Its powerful engine, efficient cutting system, and user-friendly design make it a preferred choice for anyone seeking to maintain a pristine lawn with minimal effort and maximum results.
Top Page Image Contents