Snapper SGT27540D manual Drain Fuel Separator, Service Interval Seasonally or as Needed

Page 29

Regular Maintenance

Drain Fuel Separator

Service Interval: Seasonally or as Needed

The fuel filter assembly has a built in water separator that should be drained when the indicator light in the dashboard display turns on or once per season.

Replace the fuel filter element every 800 hours of opera- tion or as required.

To drain the fuel filter:

1.Turn the engine off, set the parking brake, remove the ignition key, and wait for all moving parts to stop.

2.Allow the engine and surrounding areas to cool to room temperature.

3.Place a container under the fuel filter tube and turn the base of the filter assembly (E, Figure 24) approxi- mately 1 turn.

4.Allow the filter to drain until all water and debris have drained out.

5.Turn the base of the filter back to close the fuel filter valve when finished draining.

27

Image 29 Contents
Mfg. No. Description 27HP Hydro Tractors & Mower DecksMower Decks Page Table of Contents Safety Rules & Information Operating Safety Slope Operation Safety Rules and InformationGeneral Operation Safety Rules & InformationIgnition System Safe Handling of Gasoline Service & MaintenanceTractor ID Tag Mower ID Tag Identification NumbersCE Identification Tag Markings Safety Decals Safety DecalsDecal PTO Selector Positions Decal Danger, Rotating Fan CE, Diesel ModelsOperational Safety Checks Safety IconsControl Functions Features & Controls Automatic Controlled Traction Parking Brake FunctionDashboard Display Functions Slope Operation General Operating SafetyAdding Fuel Stopping The Tractor & EngineOperating the Tractor Pushing The Tractor By Hand Using Inboard HydraulicsHydraulic System Functions GeneralAuxiliary Hydraulics Angle Left Angle Right Using Auxiliary HydraulicsLocking The Hitch Attachment Weight LimitOptional 3-Point Hitch Operation Select Models Hitch Arms Installation Rear PTO Operation Select Models Connecting a Drive ShaftChecks Before Starting Starting & Stopping the PTOAttachment Recommendations Removing the Mower Deck Mower Deck Removal & Installation Mower Electrical Connection Installing the Mower DeckStorage Volt Power OutletAttaching a Trailer Before Every Spring Each Hours Fall Use Regular MaintenanceClean Radiator Regular MaintenanceClean Transmission Oil Cooler Check Engine Coolant LevelDrain Fuel Separator Service Interval Seasonally or as NeededCheck Transmission Oil Level Service Interval Every 25 HoursOil Filter Part No Change Transmission Oil & filterCheck Front Axle Oil Level Service Interval Every Fall & Spring Safety Interlock System CheckService Interval Every 100 Hours or Fall & Spring Check Mower Deck Gear Box OilCleaning the Battery and Cables Battery MaintenanceCheck Tire Pressures Size TreadOil LubricationGrease Lift Rod Grease Grease the ElectricFitting Yearly Arm Grease Fitting YearlyRemoving the Blade Servicing The Mower BladesMaintenance Records Troubleshooting Adjustment, & Service Troubleshooting the Mower Seat Adjustment Troubleshooting, Adjustment, & ServiceBrake Adjustment Seat Slide AdjustmentBattery Charging Headlight ReplacementTaillight & Dash Light Replacement Gauge Wheel Adjustment Mower AdjustmentsLeveling The Mower Side-to-Side Adjustment Lock Nut, 5/16-18 Spacer BoltTo avoid damaging belts, do not PRY Mower Belt ReplacementMower Drive Belt Replacement 27 HP* Briggs & Stratton SpecificationsMaintenance Items Replacement PartsOptional Accessories Technical Manuals