Snapper SGT27540D manual Troubleshooting, Adjustment, & Service, Seat Adjustment, Brake Adjustment

Page 40

Troubleshooting, Adjustment, & Service

Seat Adjustment

Seat Slide Adjustment

The seat can be adjusted forward and back. Move the lever (A, Figure 41), position the seat as desired, and release the lever to lock the seat into position.

A

Figure 41. Seat Adjustment A. Seat Adjustment Lever

Brake Adjustment

1.Disengage the PTO, stop the engine, block the wheels, remove the ignition key, and engage the parking brake.

2.Remove the mower deck (see Mower Deck Removal).

3.Locate the brake spring (A, Figure 42). Measure the length of the compressed brake spring with the park- ing brake on. The compressed brake spring length should be 3-1/2 to 3-3/4” (8,9-9,5cm).

4.If necessary, adjust the brake spring locknut to achieve the correct compressed spring length.

If this does not correct a braking problem, see your dealer.

A

3.5-3.75"

(8.9-9.5cm)

Figure 42. Brake Adjustment

A. Brake Spring

38

Image 40

Contents

Mower Decks 27HP Hydro Tractors & Mower DecksMfg. No. Description Page Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service & Maintenance Safe Handling of GasolineCE Identification Tag Markings Identification NumbersTractor ID Tag Mower ID Tag Safety Decals Safety DecalsDecal PTO Selector Positions Decal Danger, Rotating Fan CE, Diesel ModelsSafety Icons Operational Safety ChecksControl Functions Features & Controls Parking Brake Function Automatic Controlled TractionDashboard Display Functions General Operating Safety Slope OperationAdding Fuel Stopping The Tractor & EngineOperating the Tractor Using Inboard Hydraulics Pushing The Tractor By HandHydraulic System Functions GeneralUsing Auxiliary Hydraulics Auxiliary Hydraulics Angle Left Angle RightOptional 3-Point Hitch Operation Select Models Attachment Weight LimitLocking The Hitch Hitch Arms Installation Connecting a Drive Shaft Rear PTO Operation Select ModelsChecks Before Starting Starting & Stopping the PTOAttachment Recommendations Mower Deck Removal & Installation Removing the Mower DeckInstalling the Mower Deck Mower Electrical ConnectionAttaching a Trailer Volt Power OutletStorage Regular Maintenance Before Every Spring Each Hours Fall UseRegular Maintenance Clean RadiatorClean Transmission Oil Cooler Check Engine Coolant LevelService Interval Seasonally or as Needed Drain Fuel SeparatorService Interval Every 25 Hours Check Transmission Oil LevelCheck Front Axle Oil Level Change Transmission Oil & filterOil Filter Part No Safety Interlock System Check Service Interval Every Fall & SpringService Interval Every 100 Hours or Fall & Spring Check Mower Deck Gear Box OilBattery Maintenance Cleaning the Battery and CablesCheck Tire Pressures Size TreadGrease LubricationOil Grease the Electric Lift Rod GreaseFitting Yearly Arm Grease Fitting Yearly Servicing The Mower Blades Removing the BladeMaintenance Records Troubleshooting Adjustment, & Service Troubleshooting the Mower Troubleshooting, Adjustment, & Service Seat AdjustmentBrake Adjustment Seat Slide AdjustmentTaillight & Dash Light Replacement Headlight ReplacementBattery Charging Mower Adjustments Gauge Wheel AdjustmentSide-to-Side Adjustment Lock Nut, 5/16-18 Spacer Bolt Leveling The MowerMower Drive Belt Replacement Mower Belt ReplacementTo avoid damaging belts, do not PRY Specifications 27 HP* Briggs & StrattonReplacement Parts Maintenance ItemsOptional Accessories Technical Manuals