Snapper SGT27540D manual Pushing The Tractor By Hand, Hydraulic System Functions, General

Page 18

Operating the Tractor

Pushing The Tractor By Hand

DO NOT TOW TRACTOR

Towing the unit will cause transmission damage. Do not use another vehicle to push or pull this unit. Do not actuate the transmission release valve lever while the engine is running.

1.Disengage the PTO and turn the engine off.

2.Push the transmission release (B, Figure 4) forward and down to lock into the released position. The trac- tor can now be pushed by hand.

3.Move the lever rearward and up to engage the trans- mission.

A

B

Figure 4. Transmission Release Lever & Fuel Tank

A.Fuel Tank Cap.

B.Transmission Release Lever

Hydraulic System Functions

General

All of the inboard and auxiliary hydraulics are controlled by the attachment lift control lever. The attachment lift control lever raises and lowers attachments that utilize the tractor’s hydraulic lift cylinder. This lever also con- trols attachments that use the tractor’s auxiliary hydraulics via the quick couplers on the front left and right sides of the frame.

The rate of hydraulic fluid flow and pressure that are available when using the auxiliary hydraulic quick cou- plers is listed in the chart in Figure 5.

The lever has five positions: left, right, back, forward (first detent) and float (pushed forward to second detent).

Using Inboard Hydraulics

The inboard hydraulics control the tractor’s belly attach- ment lift (mower deck) and three point hitch lift (if equipped). The front / rear hydraulic selector switch must be in the REAR position.

Pulling the lever back raises the attachment lift (A, Figure

Implement Flow @ 3600 RPM

gpm—

7

6

 

Flow

5

Implement

4

 

 

3

0 100 200 300 400 Pressure — psi

Figure 5. Hydraulic System Pressure / Flow

A.

B.

Figure 6. Inboard Hydraulics

A.Lift

B.Lower

6). Pushing the lever forward to the first detent lowers the attachment lift (B, Figure 6). Pushing the lever for- ward to the second detent locks the control in “float” position, allowing the lift mechanism to float up and down.

16

Image 18
Contents 27HP Hydro Tractors & Mower Decks Mower DecksMfg. No. Description Page Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service & Maintenance Safe Handling of GasolineIdentification Numbers CE Identification Tag MarkingsTractor ID Tag Mower ID Tag Decal PTO Selector Positions Safety DecalsSafety Decals Decal Danger, Rotating Fan CE, Diesel ModelsSafety Icons Operational Safety ChecksControl Functions Features & Controls Parking Brake Function Automatic Controlled TractionDashboard Display Functions Adding Fuel General Operating SafetySlope Operation Stopping The Tractor & EngineOperating the Tractor Hydraulic System Functions Using Inboard HydraulicsPushing The Tractor By Hand GeneralUsing Auxiliary Hydraulics Auxiliary Hydraulics Angle Left Angle RightAttachment Weight Limit Optional 3-Point Hitch Operation Select ModelsLocking The Hitch Hitch Arms Installation Checks Before Starting Connecting a Drive ShaftRear PTO Operation Select Models Starting & Stopping the PTOAttachment Recommendations Mower Deck Removal & Installation Removing the Mower DeckInstalling the Mower Deck Mower Electrical ConnectionVolt Power Outlet Attaching a TrailerStorage Regular Maintenance Before Every Spring Each Hours Fall UseClean Transmission Oil Cooler Regular MaintenanceClean Radiator Check Engine Coolant LevelService Interval Seasonally or as Needed Drain Fuel SeparatorService Interval Every 25 Hours Check Transmission Oil LevelChange Transmission Oil & filter Check Front Axle Oil LevelOil Filter Part No Service Interval Every 100 Hours or Fall & Spring Safety Interlock System CheckService Interval Every Fall & Spring Check Mower Deck Gear Box OilCheck Tire Pressures Battery MaintenanceCleaning the Battery and Cables Size TreadLubrication GreaseOil Fitting Yearly Grease the ElectricLift Rod Grease Arm Grease Fitting YearlyServicing The Mower Blades Removing the BladeMaintenance Records Troubleshooting Adjustment, & Service Troubleshooting the Mower Brake Adjustment Troubleshooting, Adjustment, & ServiceSeat Adjustment Seat Slide AdjustmentHeadlight Replacement Taillight & Dash Light ReplacementBattery Charging Mower Adjustments Gauge Wheel AdjustmentSide-to-Side Adjustment Lock Nut, 5/16-18 Spacer Bolt Leveling The MowerMower Belt Replacement Mower Drive Belt ReplacementTo avoid damaging belts, do not PRY Specifications 27 HP* Briggs & StrattonOptional Accessories Replacement PartsMaintenance Items Technical Manuals

SGT27540D specifications

The Snapper SGT27540D is a robust and versatile lawn mower designed to cater to both residential and light commercial users. This model, known for its efficiency and ease of use, combines advanced technology with practical features, making yard maintenance a seamless task.

One of the standout features of the SGT27540D is its powerful 27 horsepower engine, which provides ample power for tackling various types of terrain and grass conditions. The engine’s design incorporates advanced cooling and lubrication systems, ensuring longevity and reduced maintenance needs. This lawn mower also features a self-propelled drive system, which allows users to effortlessly navigate through their yards without straining themselves.

The Snapper SGT27540D is equipped with a 54-inch cutting deck, facilitating a wide cutting swath that can efficiently cover large expanses of grass in a short amount of time. This deck features a robust steel construction for durability, and the adjustable cutting height offers versatility, allowing users to choose the perfect blade height based on their lawn’s requirements.

One of the defining technologies in the SGT27540D is the signature Snapper HiVac mowing system. This technology optimizes grass lifting, ensuring that even the toughest mowing jobs result in a clean and precise cut. As an added bonus, the HiVac system also improves grass clipping collection, making post-mowing cleanup a breeze.

Another notable characteristic of the Snapper SGT27540D is its user-friendly controls. The ergonomically designed steering lever allows for intuitive operation, while the dashboard provides essential information about speed and engine performance. For added comfort, the mower features an adjustable seat that can accommodate users of different heights.

The safety of operators is also a priority in the design of the SGT27540D. It is equipped with a reliable blade brake system that halts the blades quickly when necessary, minimizing the risk of accidents.

In summary, the Snapper SGT27540D is an exemplary lawn mower that marries durable construction with advanced technology. Its powerful engine, efficient cutting system, and user-friendly design make it a preferred choice for anyone seeking to maintain a pristine lawn with minimal effort and maximum results.