Dynacord DSA 8204, DSA 8209, DSA 8206, DSA 8212 owner manual Standby Mode Power Remote, Fan Cooling

Page 13

DIGITAL SYSTEM AMPLIFIER

3.3 Standby Mode (POWER REMOTE)

POWER REMOTE provides a simple way to remotely power-on/off the power amplifier. The POWER REMOTE function is only useful for appliances not employing a Remote Control Modul. Controlling DSA amplifiers with Remote Control Module installed per POWER REMOTE is not recommended.

Leaving the pins of POWER REMOTE socket open the appliance power is switched on. When connecting the pins the applicance enters standby mode.

3.4 Fan Cooling

The power amplifier has two fans. The fans are switched in three performance-optimized levels, i.e. they are not running permanently but the speed of the fans is controlled depending on the temperature. That in return ensures very silent running during idle state.

The temperatures of the power amps‘s channels are registered and monitored individually.

Owner‘s Manual 13

Image 13

Contents Page Page Digital System Amplifier Owner‘s Manual Important Safety InstructionsFeatures and Description Scope of Delivery and WarrantyWelcome Unpacking and InspectionHF-Interference FCC Information USA Front View Controls, Indicators and ConnectionsRear View Mains Operation & Resulting Temperature Mains SwitchOperating Voltage MountingGroundlift Power on delayHigh Pass Filter HPF Dual Selecting the Mode Of Operation and Audio Output CabelingAudio Input Cabeling Indications Volume Control30dB...LIMIT IRIS-NetFan Cooling Standby Mode Power RemoteRCM-810 System Description and FeaturesControls and Connections Can addresses Data rate of the can bus is preset to 10 kbit/sSystem Example Owner‘s Manual Maximally allowable current at the +5V output is 200 mADigital System Amplifier Bedienungsanleitung Hinweise zur Entsorgung/Wiederverwendung gemäß WeeeAuspacken und Inspektion WillkommenLieferumfang und Garantie Eigenschaften & BeschreibungFrontseite Bedienelemente, Anzeigen und AnschlüsseRückseite Netzschalter BetriebsspannungEinbau KühlungEinschaltverzögerung Hochpassfilter HPFBetriebsart Mode und Verkabelung des Audio-Ausgangs Verkabelung des Audio-Eingangs Anzeigen Eingangspegel-ReglerLüfter Standby-Modus Power RemoteBedienelemente und Anschlüsse SystembeschreibungADDRESS-Wahlschalter Die Datenrate ist auf 10 kbit/s voreingestelltCangnd Der maximale Strom am Ausgang +5V beträgt 200 mADSA Specifications/Technische DatenPout in W Pd in W1 BTU/hr2 Mains Operation & Resulting Temperature157 Block Diagram / Blockschaltbild Dimensions / Abmessungen Page Americas