Dynacord DSA 8410, DSA 8805, DSA 8405 owner manual Options, RCM-810, System Description and Features

Page 15

DIGITAL SYSTEM AMPLIFIER

4 Options

Installing one of the optionally available extension modules in the extension slot on the rear panel lets you expand the power amp’s functional range. As an example, the following paragraphs describe the RCM-810 Remote Control Module. Please read and follow the instructions provided in the documentation that you have received together with each extension module.

4.1 RCM-810

System Description and Features

The RCM-810 Remote Control Module is a digital controller module for live sound reinforcement, PA and fixed installation applications. Installing the RCM-810 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of system parameters.

RCM-810 modules allow the integration of amplifiers into a remote control network with up to 100 devices. By using multiple networks within an IRIS-Net project up to 250 amplifiers can be used in total. This offers the possibility to control and monitor an entire PA system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. All operational states, e.g. power-on status, temperature, activation of protections, load impedance, etc., are centrally registered and displayed in IRIS-Net. This provides the possibility to react and to selectively intervene even before critical operational states arise. Programming an automatic reaction, when specific thresholds are being exceeded or fallen below, is also possible.

Parameters, like power on/off, muting, etc. can be controlled in real-time and stored in the amplifier. In the event of network failure or loss of power, all settings stay intact, independent of the control by the network.

Furthermore, the RCM-810 provides a control port with freely programmable control inputs and control outputs. Control inputs (GPI's) allow the connection of switches. IRIS-Net offers the possibility to program a variety of logic functions for the inputs. Control outputs (GPO's) allow the connection of external components, which, for example, are used to signal specific states to peripheral equipment. For further details about configuration, control and monitoring of amps with installed RCM-810 modules, please refer to the documentation of IRIS-Net. The latest version of IRIS-Net is available at www.dynacord.com.

Owner‘s Manual 15

Image 15
Contents Page Digital System Amplifier Owner‘s Manual Important Safety InstructionsResponsibility of the User Scope of Delivery and WarrantyIntroduction Unpacking and InspectionDigital System Amplifier Rear View InstallationControls, Indicators and Connections Front ViewMounting Mains SwitchMains Operation and Resulting Temperature Operating VoltageFan Cooling Selecting the Mode Of Operation ModeMinimum load in Bridged mode Selecting the Mode of Output Output Ohm Mode / VLD ModeOhm Mode Mode Variable Load Drive VLDMaximum Output Power VLD deactivated Power on delayInput Output in Dual Mode or Parallel ModeOutput in Bridged Mode Audio CablingIndications Volume ControlStandby Mode Power Remote OperationSystem Description and Features OptionsRCM-810 Illustration 4.1 Controls and Connections of the RCM-810 Controls and ConnectionsMaximally allowable current at the +5V output is 200 mA Data rate of the can bus is preset to 10 kbit/sBedienungsanleitung Hinweise zur Entsorgung/Wiederverwendung gemäß Weee Wichtige SicherheitshinweiseVerantwortung des Betreibers EinführungAuspacken und Überprüfen Lieferumfang und GarantieBedienelemente, Anzeigen und Anschlüsse FrontseiteRückseite Kühlung BetriebsspannungNetzschalter EinbauLüfter Wahl der Betriebsart ModeAbbildung 2.4 Betriebsart Bridged Wahl des Ausgangs-Modus Output Ohm / VLD-ModusOhm-Modus Modus Einschaltverzögerung Ausgang in Betriebsart Brückenbetrieb Bridged Audio VerkabelungEingang Ausgang in Betriebsart Dual bzw. ParallelAnzeigen Standby-Modus Power RemoteBetrieb Eingangspegel-ReglerOptionen SystembeschreibungBedienelemente und Anschlüsse Tabelle 4.1 Werkseinstellungen RCM-810 Der maximale Gesamtstrom am Ausgang +5V beträgt 200 mA Die Datenrate ist auf 10 kbit/s voreingestelltSpecifications/Technische Daten DSAOwner‘s Manual / Bedienungsanleitung 1000 W5 500 W Mains Operation & Resulting Temperature BTU/hr3 ModeDSA Output BTU/hr Alert Alarm Mode -3dB @ 4 ΩBlock Diagram / Blockschaltbild Dimensions / Abmessungen Digital System Amplifier