Dynacord DSA 8410, DSA 8805, DSA 8405 Power on delay, Maximum Output Power VLD deactivated

DIGITAL SYSTEM AMPLIFIER

not affected by VLD. Power amplifier channels behave as described in chapter 2.7. The use of VLD considerably expands the adaptability of a power amplifier. Table 2.4 lists some application examples of VLD.

	2 Ω		4 Ω	8 Ω
125 W				2 Ω Mode DSA 8x05
		2 Ω Mode DSA 8x05		4 Ω Mode DSA 8x05
250 W				or
				2 Ω Mode DSA 8410
500 W	2 Ω Mode DSA 8x05	4 Ω Mode DSA 8x05 or		4 Ω Mode DSA 8410 or
		2	Ω Mode DSA 8410	Bridge 2 Ω DSA 8x05
1000 W	2 Ω Mode DSA 8410	4 Ω Mode DSA 8410 or		Bridge 4 Ω DSA 8x05 or
		Bridge 2 Ω DSA 8x05		Bridge 2 Ω DSA 8410
2000 W		Bridge 2 Ω DSA 8410		Bridge 4 Ω DSA 8410

Table 2.3: Maximum Output Power (VLD deactivated)

	2 Ω	4 Ω	8 Ω
125 W	VLD, all types	VLD, all types	2 Ω Mode DSA 8x05 or
			VLD DSA 8410
250 W	VLD, all types	2 Ω Mode DSA 8x05 or	4 Ω Mode DSA 8x05 or
		VLD DSA 8410	2 Ω Mode DSA 8410
	VLD DSA 8410 or	4 Ω Mode DSA 8x05 or	VLD DSA 8x05 or
500 W			4 Ω Mode DSA 8410 or
	2 Ω Mode DSA 8x05	2 Ω Mode DSA 8410
			Bridge 2 Ω DSA 8x05
	2 Ω Mode DSA 8410	4 Ω Mode DSA 8410 or	VLD DSA 8410 or
1000 W			Bridge 4 Ω DSA 8x05 or
		Bridge 2 Ω DSA 8x05
			Bridge 2 Ω DSA 8410
2000 W		Bridge 2 Ω DSA 8410	Bridge 4 Ω DSA 8410

Table 2.4: Maximum Output Power (VLD activated)

2.9 Power on delay

The ON DELAY switch on the amplifier rear panel allows selection of the power on delay time. Following table shows possible switch settings and corresponding delay times in seconds.

ON DELAY	0	1	2	3	4	5	6	7	8	9	A	B	C	D	E	F
Delay time	0	0.15	0.3	0.45	0.6	0.75	0.9	1.05	1.2	1.35	1.5	1.65	1.8	1.95	2.1	2.25
(in s)

CAUTION:

The setting of ON DELAY is ignored if a Remote Control Module is assembled.

12 Owner‘s Manual