•Relative pressure value setting
•Language display setting
LCD CONTRAST SETTING
Last digit flashing
The LCD contrast can be set within 8 levels, from LCD 1 to LCD8 (default setting is LCD 5):
1.Press and hold the SET key for about 4 seconds until the digit start flashing.
2.Use the MAX/+ or MIN/- key to view all levels of contrast.
3.Select the desired LCD contrast. Press and release the SET key to confirm selection and to enter the 12/24 Time Display setting.
12/24 HOUR TIME DISPLAY SETTING:
Digit flashing
The time display can be set to view time in 12 or 24 hour format. The default time display mode is “12h”. To set to “24h” time display:
1.Use the MAX/+ or MIN/- key to toggle the value.
2.Press and release the SET key to confirm selection and to enter the Time Zone setting.
TIME ZONE SETTING
Digit flashing
The time zone can be set ±12 hour. The default time zone is set to Eastern Time zone (“EST”). To set a different time zone:
1.The current time zone value starts flashing.
10