*When the signal from the remote temperature/humidity sensor is successfully received by the intelligent weather station, this signal reception will be switched on. (If not successful, the icon will not be shown on LCD) So the user can easily see whether the last reception is successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that reception is currently taking place.
MANUAL SETTINGS
The following manual settings can be changed when pressing and holding the SET key for approximately 4 seconds:
•LCD contrast setting
•12/24 hour time display
•Time zone setting
•Daylight time saving ON/OFF
•Manual time setting
•Calendar setting
•WWVB time reception ON/OFF setting
•°F/°C temperature unit setting
•Air pressure unit setting
9