La Crosse Technology WS-9020U 915MHZ LOW Battery Indicator, Weather Informationdisplay

Page 26

At every full hour the current air pressure is used as a basis for the display of a new graph bar. The existing graph is then moved one bar to the left.

Note:

For accurate barometric pressure trend, the intelligent weather station should operate at the same altitude. For example, it should not be moved from the ground to the second floor of the house. Should the unit be moved to a new location, discard readings for the next 48 – 60 hours.

LOW BATTERY INDICATOR

The low battery indicator will be displayed in the LCD when the battery power of the intelligent weather station is low. It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of the intelligent weather station.

Note: After battery change, both the intelligent weather station and the transmitter(s) need to be reset (see note ”Setting up”)

WEATHER INFORMATIONDISPLAY

The weather information display located at the last section of the LCD will display the weather forecast based on data received from channel 1 and the air pressure.

The intelligent weather station will automatically display the following information:

Maximum temperature of the day

Minimum temperature of the day

Probability of the weather forecast

Time frame for the weather forecast

Probability of snowfall

Probability of fog

Probability of glazed frost

Probability of tempest

Probability of strong wind

Probability of storm

Forecast for lowest night temperature

26

Image 26
Contents Features Intelligent Weather StationRemote TEMPERATURE/HUMIDITY Sensor Quick SET-UP Guide Important Notes on Set-up and OperationBattery Installation Battery Change Function Keys Intelligent weather stationMIN/- key SET keyMAX/+ key Alarm key LCD ScreenManual Settings Time Zone Setting LCD Contrast Setting12/24 Hour Time Display Setting Daylight Time Saving ON/OFF Setting Manual Time SettingCalendar Setting Wwvb Time Reception ON/OFF SettingTemperature Unit Setting Relative AIR Pressure Unit SettingRelative Pressure Value Setting Language Display SettingTo Exit the Manual Setting Mode Outdoor Temperature and HumidityAdding Sensors Optional Indoor Relative Humidity and Indoor TemperatureToggling Between MIN/MAX Indoor and Outdoor Recordings To SET-UP of Multiple Sensors To View the MIN/MAX Data from Different Transmitters When more than 1 transmitter usedTo View MIN/MAX Indoor and Outdoor Records Weather Alarm Setting To Reset the MIN/MAX Values to Current ValuesOutdoor Channel RE-LEARN Mode To re-learn ALL channelsDefault alarm values LOW Outdoor Temperature Alarm SettingHigh Outdoor Temperature Alarm Setting Weather Alarm Operations Weather Alarms Weather data Hysteresis Alarm setting Minimum MaximumHysteresis Examples of changing weather icons Sunny Cloudy with Rainy IntervalsAIR Pressure Tendency Indicator AIR PressureBAR Graph Display AIR Pressure HistoryLOW Battery Indicator Weather InformationdisplayDetailed Information Shown in the Weather Display Remote TEMPERATURE/HUMIDITY Sensor / 915MHZ Reception Check Page Positioning the Intelligent Weather Station To wall mountPositioning the Remote Temperature / Humidity Sensor To wall mountCare and Maintenance SpecificationsWarranty Information Page FCC Disclaimer Statement according to FCC part