La Crosse Technology WS-9020U 915MHZ To Reset the MIN/MAX Values to Current Values

2.While the outdoor MIN/MAX humidity and temperature date is being displayed, press the CH key. The display will toggle between the different channels MIN/MAX data.

Note:

For example, when the MIN outdoor temperature data is displayed and the MAX/+ key is pressed, MAX data outdoor temperature will be displayed. If the MAX outdoor temperature data is displayed and the MIN/- key is pressed, MIN outdoor data will be displayed.

While MIN/MAX data is displayed, the channel can be changed by pressing the CH key.

TO RESET THE MIN/MAX VALUES TO CURRENT VALUES:

To reset individual indoor and outdoor MIN/MAX values to current values:

1.Press the MAX/+, MIN/- and CH key to select the desired MIN/MAX value.

2.Press the SET key to reset the selected value to current value

Note:

To reset all indoor and outdoor MIN/MAX values to current values, press and hold the MAX/+ or MIN/- key for 3 seconds.

OUTDOOR CHANNEL RE-LEARN MODE

In case the temperature data in a particular outdoor channel often shows “--.-“ due to low battery level or false reset of a transmitter, that transmitter can be set up again.

To re-learn ALL channels:

Press and hold the CH key for 3 seconds (outdoor reception signal will show next to channel display).

WEATHER ALARM SETTING

The intelligent weather station can be set to alert when a specific weather condition is reach.

The following Weather Alarm settings can be changed when pressing and holding the ALARM key for approximately 4 seconds:

•LOW outdoor temperature alarm

•HIGH outdoor temperature alarm

19