La Crosse Technology WS-7394U instruction manual 12/24-hour Time Mode, Setting The Hour Manually

Page 10

6.Press and release the “SET” button to confirm the Radio- controlled time ON/OFF setting and continue to the 12/24-hour Time Mode setting.

F.12/24-hour Time Mode

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button four more times to advance to the 12/24- hour time mode setting.

4.“12h” or “24h” will flash above the indoor temperature/humidity display.

5.Press and release the “OUT/+” button to select 12 or 24-hour time mode.

Note: In 12h mode “PM” will appear to the left of the time during PM hours. If the time is not within the PM hours nothing will be displayed. Be sure to set the time to the correct AM/PM time to ensure automatic reception.

6.Press and release the “SET” button to confirm the 12/24-hour time mode setting and continue to the Hour setting

G.Setting The Hour Manually

The WWVB signal will override any manual set time and date information. The time will be based on the time zone selected.

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button five more times to advance to the Manual Hour setting.

4.The hour will begin to flash at the top of the display.

5.Press and release the “OUT/+” button to select the desired hour.

6.Press and release the “SET” button to confirm the hour setting and continue to the Minute setting.

H.Setting The Minutes Manually

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button six more times to advance to the Manual Minutes setting.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents WS-7394U Wireless 433 MHz Wireless Weather Station Table of Contents Inventory of Contents Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesDetailed SET-UP Guide Battery InstallationRemote Temperature and Humidity Sensor Indoor Weather StationII. Start Up Sequence Initial Start Wwvb Reception III. Explanation of LCD Information LCD Contrast Setting Program ModeOverview of programming mode sequence IV. Function Key LayoutDST ON/OFF Setting Time Zone SettingRadio-controlled Time ON/OFF Setting Setting The Hour Manually 12/24-hour Time ModeSetting The Minutes Manually Setting The Month Manually Setting The Year ManuallySetting The Date Manually Relative Pressure Setting Temperature Measuring Units Selection F or CAir Pressure Measuring Units Selection inHg/hPa Forecast Sensitivity Setting Manual Setting is NOW CompletedFeatures and Operations Outdoor Minimum and Maximum TemperatureSet Up of Multiple Units Multiple Remote Temperature SensorsViewing and Operating with Multiple Remote Sensors Weather Forecast Icon and Pressure Trend Indicators Comfort Indicator for Indoor Temperature and HumidityWeather Icons Weather Tendency Arrows Air Pressure History Bar ChartBarometric Air Pressure Reading Page Mounting with Screws Mounting the Remote Temperature SensorVII. Mounting Mounting with Adhesive TapeMaintenance and Care Instructions Using the Table StandWall Mounting Problem TroubleshootingSolution Specifications Warranty Information Support@lacrossetechnology.com
Top Page Image Contents