La Crosse Technology WS-7394U instruction manual Using the Table Stand, Wall Mounting

Page 20

B.Mounting the WS-7394U Indoor Weather Station The indoor weather station can be mounted in two ways:

with the table stand

on the wall with the use of a wall hanging screw (not included)

1.USING THE TABLE STAND

The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the indoor weather station in an appropriate location.

2.WALL MOUNTING

a.Remove the table-stand. To do this, pull down on the stand from the rear and rotate forward.

b.Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall.

c.Place the indoor weather station onto the screw using the hanging hole on the backside.

d.Gently pull the indoor weather station down to lock the screw into place.

Maintenance and Care Instructions

A.Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units.

B.Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.

C.Do not submerge in water.

D.Immediately remove all low powered batteries to avoid leakage and damage.

E.Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs.

20

Image 20
Contents WS-7394U Wireless 433 MHz Wireless Weather Station Table of Contents Inventory of Contents Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesBattery Installation Remote Temperature and Humidity SensorDetailed SET-UP Guide Indoor Weather StationII. Start Up Sequence Initial Start Wwvb ReceptionIII. Explanation of LCD Information Program Mode Overview of programming mode sequenceLCD Contrast Setting IV. Function Key LayoutRadio-controlled Time ON/OFF Setting Time Zone SettingDST ON/OFF Setting Setting The Minutes Manually 12/24-hour Time ModeSetting The Hour Manually Setting The Date Manually Setting The Year ManuallySetting The Month Manually Air Pressure Measuring Units Selection inHg/hPa Temperature Measuring Units Selection F or CRelative Pressure Setting Forecast Sensitivity Setting Manual Setting is NOW CompletedFeatures and Operations Outdoor Minimum and Maximum TemperatureViewing and Operating with Multiple Remote Sensors Multiple Remote Temperature SensorsSet Up of Multiple Units Weather Icons Comfort Indicator for Indoor Temperature and HumidityWeather Forecast Icon and Pressure Trend Indicators Barometric Air Pressure Reading Air Pressure History Bar ChartWeather Tendency Arrows Page Mounting the Remote Temperature Sensor VII. MountingMounting with Screws Mounting with Adhesive TapeWall Mounting Using the Table StandMaintenance and Care Instructions Solution TroubleshootingProblem Specifications Warranty Information Support@lacrossetechnology.com