La Crosse Technology WS-7394U instruction manual Time Zone Setting, DST ON/OFF Setting

Page 9

C.Time Zone Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button once more to advance to the Time Zone setting.

4.A number will flash to the left of the letter “h” at the top of the display just below the time display.

5.Press and release the “OUT+” button to select the desired time zone.

6.Press and release the “SET” button to confirm the Time Zone setting and continue to the DST ON/OFF setting.

D.DST ON/OFF Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button twice more to advance to the DST ON/OFF setting.

4.“DST” will appear above the indoor temperature/humidity display and “ON” or “OFF” will flash above that.

5.Press and release the “OUT/+” button to select DST ON/OFF.

Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time.

6.Press and release the “SET” button to confirm the DST ON/OFF setting and continue to the Radio-controlled Time ON/OFF setting.

E.Radio-controlled Time ON/OFF Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “SET” button three more times to advance to the Radio-controlled time ON/OFF setting.

4.“RCC” will appear above the indoor temperature/humidity display and “ON” or “OFF” will flash above that.

5.Press and release the “OUT/+” button to select Radio-controlled time ON/OFF setting.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents WS-7394U Wireless 433 MHz Wireless Weather Station Table of Contents Inventory of Contents Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideRemote Temperature and Humidity Sensor Battery InstallationDetailed SET-UP Guide Indoor Weather Station Wwvb Reception II. Start Up Sequence Initial StartIII. Explanation of LCD Information Overview of programming mode sequence Program ModeLCD Contrast Setting IV. Function Key LayoutTime Zone Setting DST ON/OFF SettingRadio-controlled Time ON/OFF Setting 12/24-hour Time Mode Setting The Hour ManuallySetting The Minutes Manually Setting The Year Manually Setting The Month ManuallySetting The Date Manually Temperature Measuring Units Selection F or C Relative Pressure SettingAir Pressure Measuring Units Selection inHg/hPa Manual Setting is NOW Completed Forecast Sensitivity SettingOutdoor Minimum and Maximum Temperature Features and OperationsMultiple Remote Temperature Sensors Set Up of Multiple UnitsViewing and Operating with Multiple Remote Sensors Comfort Indicator for Indoor Temperature and Humidity Weather Forecast Icon and Pressure Trend IndicatorsWeather Icons Air Pressure History Bar Chart Weather Tendency ArrowsBarometric Air Pressure Reading Page VII. Mounting Mounting the Remote Temperature SensorMounting with Screws Mounting with Adhesive TapeUsing the Table Stand Maintenance and Care InstructionsWall Mounting Troubleshooting ProblemSolution Specifications Warranty Information Support@lacrossetechnology.com
Top Page Image Contents