La Crosse Technology WS-7394U IV. Function Key Layout, Program Mode, LCD Contrast Setting

Page 8

IV. Function Key Layout

A.The below picture shows the four function keys used in programming and operation of your indoor weather station

V.Program Mode

The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the indoor weather center. Complete programming is usually done for the initial set-up, and will require you to skip step 1,2 and 3 of each programming section. The programming mode can be exited at any time by either pressing the “CH” button, or waiting for the 15-second time-out to take effect.

A. Overview of programming mode sequence

1.	LCD Contrast	2.	Time Zone	3.	DST ON/OFF
4.	Radio-controlled	5.	12/24-hour	6.	Hour
	Time ON/OFF		time mode
7.	Minute	8.	Year	9.	Month
10.	Date	11.	°F/°C	12.	inHg/hPa
13.	Relative pressure	14.	Forecast
	setting		sensitivity

B.LCD Contrast Setting

1.Press and hold the “SET” button for five seconds.

2.“lcd” will appear at the top of the display and a number will flash next to it.

3.Press and release the “OUT/+” button to select the desired LCD contrast setting.

4.Press and release the “SET” button to confirm the LCD contrast setting and continue to the Time Zone setting.

8

Image 8

Contents WS-7394U Wireless 433 MHz Wireless Weather Station Table of Contents Inventory of Contents Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesBattery Installation Remote Temperature and Humidity SensorDetailed SET-UP Guide Indoor Weather StationII. Start Up Sequence Initial Start Wwvb ReceptionIII. Explanation of LCD Information Program Mode Overview of programming mode sequenceLCD Contrast Setting IV. Function Key LayoutRadio-controlled Time ON/OFF Setting Time Zone SettingDST ON/OFF Setting Setting The Minutes Manually 12/24-hour Time ModeSetting The Hour Manually Setting The Date Manually Setting The Year ManuallySetting The Month Manually Air Pressure Measuring Units Selection inHg/hPa Temperature Measuring Units Selection F or CRelative Pressure Setting Forecast Sensitivity Setting Manual Setting is NOW CompletedFeatures and Operations Outdoor Minimum and Maximum TemperatureViewing and Operating with Multiple Remote Sensors Multiple Remote Temperature SensorsSet Up of Multiple Units Weather Icons Comfort Indicator for Indoor Temperature and HumidityWeather Forecast Icon and Pressure Trend Indicators Barometric Air Pressure Reading Air Pressure History Bar ChartWeather Tendency Arrows Page Mounting the Remote Temperature Sensor VII. MountingMounting with Screws Mounting with Adhesive TapeWall Mounting Using the Table StandMaintenance and Care Instructions Solution TroubleshootingProblem Specifications Warranty Information Support@lacrossetechnology.com