Bosch Appliances X40 SN manual Basic Mode Encoder Profile

34 en Configuration Using a Web Browser VideoJet X40 SN

Gateway address

If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).

5.6 Basic Mode: Encoder Profile

Active profile

You can select a profile for encoding the video signal for each encoder (video input). You can use this to adapt the video data transmission to the operating environment (for example network structure, bandwidth, data load).

Pre-programmed profiles are available, each giving priority to different perspectives. When selecting a profile, details are displayed in the list field.

–Low bandwidth (CIF)

High quality for low bandwidth connections, resolution 352 × 288/240 pixels

–Low delay (2/3 D1)

High quality with low delay, resolution 464 × 576/480 pixels

–High resolution (4CIF/D1)

High resolution for high bandwidth connections, resolution 704 × 576/480 pixels

–DSL

For DSL connections with 500 kbps, resolution 352 × 288/240 pixels

–ISDN (2B)

For ISDN connections via two B-channels, resolution 352 × 288/240 pixels

–ISDN (1B)

For ISDN connections via one B-channel, resolution 352 × 288/240 pixels

–Modem

For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels

–GSM

For GSM connections at 9,600 baud, resolution 176 × 144/120 pixels

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems