VideoJet X40 SN | Installation en 23 |
|
|
Backup Power Supply
If the VideoJet X40 SN does not have a permanent power supply, it may be necessary to supply the internal clock separately. To do this, you can connect the VideoJet X40 SN directly to a battery via the BP and GND contacts. The correct time is crucial for evaluating local recordings.
CAUTION!
! Connect only batteries with the following specification: 10 to 30 V DC, 50 Ah max., 12/24 V continuous flow.
1. Connect the + (plus) line on the battery to the BP terminal on the orange terminal block.
2. Connect the – (minus) line on the battery to the GND terminal on the orange terminal block.
3. Now check that the connections are secure.
NOTICE!
i If you do not connect a battery to the unit, you should specify a time server to ensure correct system time.
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |
