44 en Configuration Using a Web Browser

VideoJet X40 SN

 

 

Show alarm inputs

Alarm inputs are shown next to the video image as icons, along with their assigned names. If an alarm is active, the corresponding icon changes color.

Show relay outputs

Relay outputs are shown next to the video image as icons, along with their assigned names. If the relay is switched, the icon changes color.

Show VCA trajectories

The trajectories (motion lines of objects) from the video content analysis are displayed in the live video image if a corresponding analysis type is activated (see Section 5.31 Advanced Mode: VCA Event Triggered, page 73).

Show VCA metadata

When the analysis function is activated, the additional information from the video content analysis (VCA) will be displayed in the live video image (see Section 5.31 Advanced Mode: VCA Event Triggered, page 73). With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded will be marked with rectangles.

Show event log

The event messages are displayed along with the date and time in a field next to the video image.

Show system log

The system messages are displayed along with the date and time in a field next to the video image and provide information about establishing and ending connections, for example.

Allow snapshots

Here you can specify whether the icon for saving individual images should be displayed below the live image. Individual images can only be saved if this icon is visible.

Allow local recording

Here you can specify whether the icon for saving video sequences on the local memory should be displayed below the live image. Video sequences can only be saved if this icon is visible.

Path for JPEG and MPEG files

1.Enter the path for the storage location of individual images and video sequences that you can save from the LIVEPAGE.

2.If necessary, click Browse to find a suitable directory.

DOC V4.0 2009.06

Installation and Operating Manual

Bosch Security Systems

Page 44
Image 44
Bosch Appliances X40 SN Show alarm inputs, Show relay outputs, Show VCA trajectories, Show VCA metadata, Show event log