
VideoJet X40 SN | Installation en 25 |
|
|
Configuring the VideoJet X40 SN
You can start the Configuration Manager immediately after installation.
1.
2.You can start the configuration if a VideoJet X40 SN is shown in the list in the left section of the window. To do this,
3.Click Unit network settings... in the popup menu.
4.In the Unit IP address field, enter a valid IP address for your network (for example 192.168.0.110) and click OK. The unit reboots and the IP address is valid.
5.If required, enter an appropriate subnet mask for the IP address, and additional network data.
i | NOTICE! | |
You must reboot to activate the new IP address, a new subnet mask or a gateway IP address. | ||
|
Reboot
You can trigger the reboot directly with the assistance of the Configuration Manager.
X
Additional Parameters
You can check and set additional parameters with the assistance of the Configuration Manager. You can find detailed information on this in the documentation for this program.
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |