VideoJet X40 SN | Configuration Using a Web Browser en 39 |
|
|
You can define and change a password for each authorization level if you are logged in as service or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
NOTICE!
i A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password.
5.12 | Advanced Mode: Date/Time |
Date format
Select your required date format.
Unit date/Unit time
If there are multiple devices operating in your system or network, it is important to synchronize their internal clocks. For example, it is only possible to identify and correctly evaluate simultaneous recordings when all units are operating on the same time.
1.Enter the current date. Since the unit time is controlled by the internal clock, there is no need to enter the day of the week – it is added automatically.
2.Enter the current time or click the Sync to PC button to copy your computer's system time to the VideoJet X40 SN.
Unit time zone
Select the time zone in which your system is located.
Daylight saving time
The internal clock can switch automatically between normal and daylight saving time (DST). The unit already contains the data for DST
NOTICE!
i | If you do not create a table, there will be no automatic switching. When changing and clearing |
| |
| individual entries, remember that two entries are usually related to each other and dependent |
| on one another (switching to summer time and back to normal time). |
|
|
Bosch Security Systems | Installation and Operating Manual | DOC V4.0 2009.06 |
