54 en Configuration Using a Web Browser | VideoJet X40 SN |
|
|
Device manager
If you activate the VRM option in this screen, the VRM Video Recording Manager will manage all recording and you will not be able to configure any further settings here.
CAUTION!
! Activating or deactivating VRM causes the current settings to be lost; they can only be restored through reconfiguration.
Recording media
Select the required recording media here so that you can then activate them and configure the recording parameters.
iSCSI Media
If you want to use an iSCSI system as a recording medium, you must set up a connection to the required iSCSI system and set the configuration parameters.
NOTICE!
i The iSCSI storage system selected must be available on the network and completely set up. Amongst other things, it must have an IP address and be divided into logical drives (LUN).
1.Enter the IP address of the required iSCSI destination in the iSCSI IP address field.
2.If the iSCSI destination is password protected, enter this into the Password field.
3.Click the Read button. The connection to the IP address will be established. In the Storage overview field, you can see the corresponding logical drives.
Local Media
The supported local recording media are displayed in the Storage overview field.
XIf the local recording medium is password protected, enter this into the Password field.
Activating and Configuring Storage Media
The storage overview displays the available storage media. You can select individual media or iSCSI drives and transfer these to the Managed storage media list. You can activate the storage media in this list and configure them for storage.
CAUTION!
Each storage medium can only be associated with one user. If a storage medium is already
! being used by another user, you can decouple the user and connect the drive with the VideoJet X40 SN. Before decoupling, make absolutely sure that the previous user no longer needs the storage medium.
1. In the Recording media section, click the iSCSI Media and Local Media tabs to display the applicable storage media in the overview.
2. In the Storage overview section,
Not active.
3. Click the Set button to activate all media in the Managed storage media list. In the Status column, these are indicated by the status Online.
4. Check the box in the Rec. 1 or Rec. 2 to specify which data stream should be recorded on the storage media selected. Rec. 1 stores Stream 1, Rec. 2 stores Stream 2. This means that you can record the standard data stream on a hard drive and record alarm images on the mobile CF card, for example.
DOC V4.0 2009.06 | Installation and Operating Manual | Bosch Security Systems |
