Bosch Appliances X40 SN manual SSL encryption, Auto-connect, Default camera

VideoJet X40 SN Configuration Using a Web Browser en 65

SSL encryption

The data for the connection, for example the password, can be securely transmitted with SSL encryption. If you have selected the On option, only encrypted ports are offered in the Remote port parameter.

NOTICE!

i	Please note that the SSL encryption must be activated and configured at both ends of a
	connection. This requires the appropriate certificates to be uploaded onto the
	VideoJet X40 SN (see Section Maintenance log, page 90).

You can activate and configure encryption of the media data (video, audio and metadata) on the Encryption page (see Section 5.42 Advanced Mode: Encryption, page 88).

Auto-connect

Select the On option to automatically re-establish a connection to one of the previously specified IP addresses after each reboot, after a connection breakdown or after a network failure.

NOTICE!

i In the default setting, Stream 2 is transmitted for automatic connections. Bear this fact in mind when assigning the profile (see Section 5.19 Advanced Mode: Encoder Profile, page 48).

Audio

Select the On option if you wish to additionally transmit a standalone G.711 encoded audio stream with alarm connections.

Default camera

Here you can select the camera whose image will be automatically displayed first on the receiver when the alarm connection is made. Depending on the system configuration, the receiver can then select the other cameras as well.

i	NOTICE!
	The numbering follows the labeling of the video inputs on the actual unit.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06