Bosch Appliances X40 SN manual Advanced Mode Encryption

88 en Configuration Using a Web Browser VideoJet X40 SN

–Large

704 × 576/480 pixels (4CIF)

File name

You can select how file names will be created for the individual images that are transmitted.

–Overwrite

The same file name is always used and any existing file will be overwritten with the current file.

–Increment

A number from 000 to 255 is added to the file name and automatically incremented by 1. When it reaches 255 it starts again from 000.

–Date/time suffix

The date and time are automatically added to the file name. When setting this parameter, ensure that the unit's date and time are always correctly set. Example: the file snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and 30 seconds.

	Posting interval
	Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if
	you do not want any images to be sent.
	FTP server IP address
	Enter the IP address of the FTP server on which you wish to save the JPEG images.
	FTP server login
	Enter your login name for the FTP server.
	FTP server password
	Enter the password that gives you access to the FTP server.
	Path on FTP server
	Enter the exact path on which you wish to post the images on the FTP server.
	Post JPEG from camera
	Click the checkbox to activate the camera input for the JPEG image. An enabled camera
	inputis indicated by a check mark.
i	NOTICE!
	The numbering follows the labeling of the video inputs on the actual unit.
	NOTICE!
i	The creation of JPEG images has a lower priority than video encoding and image analysis.
	Thiscan result in JPEG images being created with a delay of up to several seconds after the
	triggering event. If reliable, real-time recording of the alarm is required, ensure that the
	encoder has enough computing power available.
5.42	Advanced Mode: Encryption
	A special license, with which you will receive a corresponding activation key, is required to
	encrypt user data. You can enter the activation key to release the function on the Licenses
	page (see Section 5.44 Advanced Mode: Licenses, page 91).

DOC V4.0 2009.06 Installation and Operating Manual Bosch Security Systems