La Crosse Technology WS-7394U Detailed SET-UP Guide, Battery Installation, Indoor Weather Station

Page 5

DETAILED SET-UP GUIDE

I.Battery Installation

Batteries will fit tightly. To avoid start-up problems, make sure that the batteries do not spring free. Also be sure to insert alkaline batteries into the remote temperature sensor first, then the indoor weather station. Initial set up should be done with the remote temperature sensor and indoor weather station in the same room. The units should be permanently mounted only after the signal reception has been verified.

A.Remote Temperature and Humidity Sensor

1.Remove the mounting bracket. The bracket snaps on and off easily.

2.Remove the battery cover, by sliding the cover down.

3.Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid start-up problems make sure they do not spring free).

4.4. Replace the battery cover by sliding upwards. Be sure battery cover is on securely.

B.Indoor Weather Station

1.Remove the battery cover (the cover has white writing on it).

2.Observe the correct polarity, and install two Alkaline AA batteries.

3.Do not press any buttons for at least ten minutes. If a button is pressed before the indoor weather station has received information from the TX4U sensor, no data will be received from that sensor until reset.

4.Replace the battery cover.

Battery Cover

5

Image 5

Contents WS-7394U Wireless 433 MHz Wireless Weather Station Table of Contents Inventory of Contents Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideRemote Temperature and Humidity Sensor Battery InstallationDetailed SET-UP Guide Indoor Weather StationWwvb Reception II. Start Up Sequence Initial StartIII. Explanation of LCD Information Overview of programming mode sequence Program ModeLCD Contrast Setting IV. Function Key LayoutRadio-controlled Time ON/OFF Setting Time Zone SettingDST ON/OFF Setting Setting The Minutes Manually 12/24-hour Time ModeSetting The Hour Manually Setting The Date Manually Setting The Year ManuallySetting The Month Manually Air Pressure Measuring Units Selection inHg/hPa Temperature Measuring Units Selection F or CRelative Pressure Setting Manual Setting is NOW Completed Forecast Sensitivity SettingOutdoor Minimum and Maximum Temperature Features and OperationsViewing and Operating with Multiple Remote Sensors Multiple Remote Temperature SensorsSet Up of Multiple Units Weather Icons Comfort Indicator for Indoor Temperature and HumidityWeather Forecast Icon and Pressure Trend Indicators Barometric Air Pressure Reading Air Pressure History Bar ChartWeather Tendency Arrows Page VII. Mounting Mounting the Remote Temperature SensorMounting with Screws Mounting with Adhesive TapeWall Mounting Using the Table StandMaintenance and Care Instructions Solution TroubleshootingProblem Specifications Warranty Information Support@lacrossetechnology.com