Cub Cadet SLTX1054 warranty Controls and Features, Brake Pedal, Throttle/Choke Control Lever

Page 12

Controls and Features

4

Systems Indicator

Monitor

Fuel Tank Cap

Ignition Switch

Module

Throttle/Choke Control

 

Fuel Level Indicator

Electric PTO Knob

 

Brake Pedal Cargo Net

Seat Adjustment Lever

Storage Bin

 

Drive Pedal

Parking Brake/

Reverse Pedal

Cruise Control Lever

Deck Lift Lever

 

Cup Holder

Figure 4-1

Lawn Tractor controls and features are illustrated in Fig. 4-1 and described on the following pages.

WARNING! Read and follow all safety rules and instructions in this manual, including the entire Operation section, before attempting to operate

this machine. Failure to comply with all safety rules and instructions may result in personal injury.

NOTE: Your tractor is equipped with either a Throttle/Choke Control Lever which controls the throttle and choke or separate Throttle and Choke controls. Use the controls and features that are applicable to your tractor.

Brake Pedal

The brake pedal is located on the left front side of the tractor above the drive pedal along the running board. The brake pedal can be used for sudden stops or setting the parking brake.

NOTE: The brake pedal must be fully depressed to activate the safety interlock switch when starting the tractor.

Throttle/Choke Control Lever

The throttle/choke control is located on the left side of the tractor’s dash panel. This lever controls the speed of the engine and, when pushed all the way forward, closes the choke for cold starting. When set in a given position, the throttle will maintain a uniform engine speed.

NOTE: When operating the tractor with the cutting deck engaged, be certain that the throttle/choke control is always in the FAST (rabbit) position.

Seat Adjustment Lever

The seat adjustment lever is located below the front/left of the seat. The lever allows for adjustment of the fore to aft position of the operator’s seat. Refer to the Assembly and Set-Up section of this manual for more detailed instructions.

12

Image 12
Contents Operator’s Manual Table of Contents To The OwnerThank You Record Product InformationImportant Safe Operation Practices California Proposition General OperationSlope Operation Do NotService General ServiceChildren TowingDo not modify engine Spark ArrestorSafety Symbols SymbolImportant Safe Operation Practices Assembly & Set-Up Contents of CrateTractor Set-Up Connecting the Battery Cables Setting the Deck Gauge WheelsChecking Tire Pressure Adjusting the Seat Gas and OilControls and Features Seat Adjustment LeverBrake Pedal Throttle/Choke Control LeverIgnition Switch Module Systems Indicator Monitor/Hour Meter LCDDeck Lift Lever Drive PedalFuel Level Indicator PTO / Blade Engage KnobParking Brake/Cruise Control Lever Safety Interlock Switches OperationStarting the Engine Stopping the EngineReverse Caution Mode Driving The TractorEngaging the Parking Brake Setting the Cruise Control Using the Deck Lift LeverDriving On Slopes Operating the HeadlightsOnoff MowingMaintenance & Adjustments Maintenance ScheduleMaintenance Changing the Engine OilCleaning the Tractor Air Cleaner Spark Plug Hydrostatic TransmissionSmart Jet Lubrication Front WheelsPivot Points & Linkage Deck WheelsAdjustments Deck SpindleLeveling the Deck Front To Rear Steering Adjustment Parking Brake AdjustmentBall Joint Adjustment Gear Hex Bolt Leveling the Deck Side to SideService Cutting Deck RemovalInsert Ratchet Here Deck Idler Bracket Cutting Blades Deck Lift Arm Deck Support PinFlange Lock Nut Block of Wood Battery Jump StartingCharging Fuse Tires Changing the Deck BeltChanging the Transmission Drive Belt Hex Screws Belt Keeper RodPulley Outer Spindle PulleysPTO Belt Troubleshooting Problem Cause RemedyReplacement Parts Component Part Number and DescriptionComponent Part Number and DescriptionAttachments & Accessories Model Number DescriptionPage Your Warranty Rights and Obligations Vapor lines U.S.A Manual del Operador Al propietario GraciasÍndice Registro de información de productoMedidas importantes de seguridad Proposición 65 de CaliforniaFuncionamiento general Funcionamiento en pendientes Haga lo siguienteNo haga lo siguiente Servicio NiñosRemolque Manejo seguro de la gasolinaNo modifique el motor Aviso referido a emisionesGuardachispas Advertencia Superficie Caliente El poste de una empalizada Montaje y Configuración Configuración del tractorContenido del cajón Mover Manualmente el TractorInstalación del cable de la baterías Control de la presión de los neumáticosAjuste de las ruedas de calibración de la plataforma Ajuste del asiento Gasolina y aceiteControles y Características Control del regulador/cebadorPedal de freno Palanca de ajuste del asientoMódulo del interruptor de encendido Pedal de la transmisiónPedal de la marcha atrás Cargo Neto Indicador de nivel de combustibleBatería Si el motor equipados Funcionamiento Encendido del motorDetención del motor Conducción del tractor Operación en pendientesBotón de Corte de césped Utilización de la palanca de elevación de la plataformaFuncionamiento de los faros delanteros Colocación del freno de mano Activación del control de cruceroMantenimiento y Ajustes Calendario de mantenimientoMantenimiento MotorLimpieza del tractor Depurador de aireBujía de encendido Palanca de cambioLubricación Ruedas delanterasPuntos de pivote y varillaje Ruedas de plataformaAjustes Husillo de plataformaNivelación de la plataforma adelante atrás Nivelación de la plataforma lado a lado Ajuste del freno de manoAjuste del volante Engranaje De ajuste Perno HexagonalServicio Extracción de la plataforma de corteInserte aquí Trinquete Soporte de la Cubierta Polea Cuchillas de corte Para retirar las cuchillas, haga lo siguienteBatería Arranque por medio de conexión en puenteCarga de la batería Fusible NeumáticosCambio de la correa de transmisión Cambio de la correa de la plataformaPTO Solución de Problemas Cebador no activadoEl motor vacila a altas Piezas de reemplazo ComponenteComponente Número de pieza y Descripción Aditamentos y Accesorios DescripciónSUS Derechos Y Obligaciones EN Cuanto a LA Garantía Líneas de vapor GDOC-100014 REV. B

SLTX1054 specifications

The Cub Cadet SLTX1054 is a robust riding lawn mower designed for homeowners seeking power, precision, and ease of use in lawn care. With its strong build and user-friendly features, this mowing machine stands out in the crowded market of garden equipment.

One of the key features of the SLTX1054 is its powerful 26-horsepower Kohler engine. This V-twin engine ensures efficient performance, offering plenty of torque for tough mowing jobs. The engine is designed with durability in mind, allowing for consistent performance over time, even in demanding conditions.

The 54-inch cutting deck is another notable aspect of the SLTX1054. This wide deck allows for expansive coverage, making it ideal for medium to large lawns. The deck is equipped with a combination of high-performance blades that deliver a clean cut, promoting healthier grass growth. With adjustable cutting heights ranging from 1.5 inches to 4 inches, homeowners can customize their mowing experience based on their lawn's specific needs.

The Cub Cadet SLTX1054 also showcases advanced technologies that enhance usability. The hydrostatic transmission offers smooth acceleration and effortless operation. This feature enables the operator to control the mower's speed with a simple push of the pedal, eliminating the need for gear shifting, which can be cumbersome on traditional lawn tractors.

Another highlight is the tight turning radius, which allows users to maneuver easily around flower beds, trees, and other obstacles. This agility reduces the need for additional trimming and provides a cleaner finish overall. The comfortable, adjustable high-back seat ensures an enjoyable driving experience for longer mowing tasks, reducing fatigue for the operator.

The SLTX1054 is also equipped with a dash-mounted deck lift, enabling users to raise and lower the mowing deck conveniently without leaving the driver's seat. This feature simplifies transitions between different cutting heights, making it easier to adapt to changing terrains.

Durability is a hallmark of the Cub Cadet brand, and the SLTX1054 is no exception. With its reinforced steel frame and rugged construction, this mower is built to withstand the rigors of regular lawn maintenance. Its tough, powder-coated finish adds an extra layer of protection against rust and corrosion.

In conclusion, the Cub Cadet SLTX1054 combines power, performance, and ease of use in a single package. With features like a robust engine, expansive cutting deck, hydrostatic transmission, and advanced maneuverability, this riding mower is a fantastic choice for homeowners looking to maintain their lawns efficiently and effectively. Whether tackling large lawns or navigating tight spaces, the SLTX1054 is up to the challenge.